-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Sunstone Circuits R&D: 3D Printing Great for Prototyping
May 5, 2016 | Barry Matties, Publisher, I-Connect007Estimated reading time: 3 minutes
We’ve been hearing a lot about 3D printing for the past few years. But where does 3D printing fit in with traditional rigid circuit board development? Sunstone Circuits recently completed a project that focused on that very question. Sunstone Product Manager Nolan Johnson explains why 3D printing is a viable option when it comes to jigs and parts of the support infrastructure that are needed when prototyping today’s emerging technologies.
Barry Matties: Nolan, today we're talking about some new technology that you're demonstrating here. Why don't you start by telling us about it.
Nolan Johnson: Sure. We're here at the IDTechEx printed electronics show where there are a lot of emerging technologies around graphene, printed electronics, energy, IoT, wearable devices, and that sort of thing.
Matties: Where does the traditional rigid circuit board work fit into that sort of environment?
Johnson: Well, the story that we're telling here is this: We did a project starting with some open-source designs for a smartwatch, a Bluetooth connection to an Android application, and we started with some off-the-shelf components. We breadboarded together the design, confirmed that it would work, and then we started using our expertise at Sunstone with PCB123 to design a custom single board to hold the Arduino and all the support electronics. We made a single board for the smartwatch, and attached that to an OLED display. Then using our sister company, 3D Fixtures (www.3dfixtures.com), we rapid prototyped a series of watch cases and a jig. The jig has some control circuitry underneath that is a basic circuit board. With this, we can take the board once it's back from manufacturing and assembly, snap it into the jig, program it, make it a functional watch, and put it into the case.
We counted the hours to do this from start to finish including rapid prototyping the jig, concurrently with having the boards manufactured. Everything came together on the workbench on the same day and to go from the start to a prototype that we could show off here at the show, took 59 hours. Where the rigid PCB and 3D printing really fit, as we see it, is in the support infrastructure for the manufacturing and finalizing of all of the emerging technologies.
Matties: Tell us how the customers are going to win by doing this.
Johnson: It happens more and more with Arduinos and other microprocessors that are so accessible going onto projects that are getting smaller and smaller all the time. One example is a gentleman we were talking to who has an Arduino-based hummingbird feeder that adjusts, heats and cools the hummingbird feeder to keep the nectar just exactly right for his hummingbirds. These microprocessors are showing up in all sorts of applications. At what point do you program that, boot load that into your consumer device and get that running?
You're going to need some jigs to do that even if you're just a small mom-and-pop shop doing that sort of thing, and that's exactly where 3D Fixtures benefits its customers. You can custom design what you need for doing that part of your work. Get it made in one, two, or three days in quantities of four, five, or six very affordably, and get started. It beats the heck out of trying to do metalwork at a machine shop to fit that sort of a thing.
Matties: Is the idea that they buy the printer?
Johnson: No, we do the printing for them. All we need to do this is the mechanical design. We can even help with the design, but basically we need the CAD file (STL or STEP), and we run it though the printer. It’s just the same exact business model as we've been running at Sunstone with PCBExpress and ValueProto for years and years.
To read this entire article, which appeared in the March issue of The PCB Design Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.