Laser Pointers: Special Edition—Those Five Words I Didn’t Expect to Hear
June 30, 2016 | Mike Jennings, ESIEstimated reading time: 5 minutes
I’m going to hijack the column this month for kind of a public service announcement regarding a topic that hit very close to home for me, and it may well hit home for others. Patrick will be back next month with some letters from our mailbag.
On February 18, 2016, I heard the words, “Mike, you have bladder cancer.”
The scary thing was that I had no symptoms that I could see or feel; so I had no idea that anything was wrong. It was discovered during a routine pre-surgical screening for an upcoming tune-up on my knee replacement. My orthopedic surgeon took a look at the test results and told me that there was a slight elevation in blood in the urine, and I should repeat the test to be sure it wasn't a false reading. Repeat I did, and three days later I was in a urology office.
Over the next four days, I had an ultrasound, a CT scan, and a procedure called a cystoscopy, where a camera is fed up into your bladder to allow the doctor to view the bladder wall. After the cystoscopy, I was told the five words that I began this story with. I lamely protested that it can’t be true, maybe it’s nothing; in short, the usual denial reflex to bad news.
My doctor sat with me and explained the situation, and gave me a number of resources to look into just to help me deal with the diagnosis. With the help of Bladder Cancer Advocacy Network I was able to learn some facts about it and how it is treated today.
Some facts about bladder cancer from BCAN:
- It's the 6th most common diagnosed cancer.
- While men get bladder cancer more often than women, recent statistics show an increase in the number of women being diagnosed with the disease. Unfortunately, because the symptoms of bladder cancer are similar to those of other gynecologic and urinary diseases affecting women, women may be diagnosed when their disease is at a more advanced stage.
- Smoking is the greatest risk factor (irony: I don't smoke). Smokers get bladder cancer twice as often as people who don’t smoke.
- The risk of bladder cancer increases as you get older (I’m 60, for what it’s worth).
- The most common sign is blood in the urine, even if it is invisible to your eye and has no accompanying pain (as was my case). It can also be transitory as well…noticeable and then apparently no longer there (but it is…).
- People who have had bladder cancer have a higher chance of getting another tumor in their urinary system. People whose family members have had bladder cancer may also have a higher risk.
With this and more knowledge in hand, I had my first surgery on March 1, less than two weeks after I was told about it. I underwent a procedure called “TURBT” (transurethral resection of a bladder tumor).
The TURBT is “incision-less” surgery that was done under general anesthetic as an outpatient procedure at my local hospital. I checked into the hospital at 9 a.m., and I was on my way home by 3 p.m. It is the first-line surgical treatment for bladder tumors. Like the cystoscope, the resectoscope (the instrument used to remove the tumor), is introduced through the urethra into the bladder. Attached to this scope is a small, electrified loop of wire which is moved back and forth through the tumor to cut and remove the tissue.
After the surgery, I received a one-time dose of chemotherapy that was instilled into my bladder at the end of the surgery; I went home with a catheter and bag that stayed in place for two days.
I had what was called a high-grade T1 tumor, which meant it was indeed cancer, and had reached into the second layer of my bladder wall. Pathology reports indicated that it was completely removed; but a second surgery 2−3 months later had already been discussed with me, for the purpose of taking deep tissue biopsies to confirm this.
While I don't want it to sound like it was easy, the level of pain was more a level of high discomfort. I spent the first few days after surgery in the recliner, since the heaviest thing that I was allowed to lift was a remote or a tablet computer so that I could at least stay caught up with work. Within two weeks, I felt well enough to drive and was back to the office at the five-week mark after working from home during my recovery.
The second surgery was on May 17, again done under general anesthesia at my local hospital. I was actually on the way home by 1 p.m., since this procedure, while just as invasive, was a lot less extensive. My recovery was a lot faster as well: I was driving in a week and back in the office in three.
On June 1, I received the good news that the biopsies came back clear, and we could begin a second phase of treatment called immunotherapy, which I began on June 17. Each Friday for six weeks I go into the doctor’s office, a catheter is inserted, a small amount of medicine containing a bacteria called Bacille Calmette-Guerin (BCG) is introduced, the catheter is removed and I go home. I’m able to drive myself. There are very detailed protocols that one needs to follow after each treatment, but the doctor clearly explains each step and why it’s important. In my case, the side effects are very minimal (my appetite goes away for about 24 hours…not a bad thing necessarily, and I feel pretty lethargic).
In the medium to long term, I will have to repeat the cystoscopy procedure every few months to allow the doctor to see that everything is staying away, and we will probably continue a short course of immunotherapy going forward. The score is Mike 1, Cancer 0, and we want to keep it that way with frequent check-ups.
The reason that I stole the column today to relate my story is to tell everyone to get checked. It can be as simple as taking that little plastic cup from your doctor. Please do it this week while it is on your mind. Call your parents, aunts and uncles, brothers and sisters and gently remind them to have it done as well.
And now back to our regularly scheduled program, joined in progress…
Suggested Items
Design007 Magazine April 2024: Level Up Your Design Skills
04/08/2024 | I-Connect007 Editorial TeamIn this issue of Design007 Magazine, our contributors—many of them IPC staff members—discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, designing for flex test, design for reality, chiplet design, and DFM. If you don't come to the conference, you're missing out.
It’s Only Common Sense: 16 Proven Strategies for Making the Most of Your Trade Show Dollars
04/08/2024 | Dan Beaulieu -- Column: It's Only Common SenseSo many times, people and companies spend a small fortune exhibiting at trade shows like IPC APEX EXPO 2024 when they have no idea why they are going, what they will do there, and what they expect to accomplish at the show. It’s plain dumb. You must have a plan, man. Know why you’re going and what will happen when you get there. Set goals and make sure that you achieve those goals.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
02/23/2024 | Andy Shaughnessy, Design007 MagazineIt was a good week in PCB design and manufacturing. In this week’s wrap-up, we have news about an uptick in EMS shipments in January, a look at the current M&A climate, some guidance on investing in your company in order to stay competitive, a primer on designing with embedded capacitance materials, and a roadmap for the industry to embrace sustainable PCBs in the future.
Every Designer Needs to Understand Embedded
02/14/2024 | I-Connect007 Editorial TeamIPC’s Kris Moyer teaches design techniques for embedding components, and he’s noticed an upswing in his students’ interest in embedded component design. We recently spoke with him about embedding component design: best practices, pros and cons, and when it makes sense for designers to start embedding.
IPC Standards: Ticket to a Safe Passage
10/26/2023 | I-Connect007 Editorial TeamJohn Watson, CID, is a customer success manager with Altium who also teaches PCB design at Palomar College in Carlsbad, California. He’s noticed that most of his students are primarily new to the industry and not familiar with IPC standards. In his classes, he teaches how to use these standards while trying to help students access the documents more easily. When we met with John, we asked him to discuss the importance of understanding IPC standards, the price you’ll pay if you decide not to follow them, and his plans for getting new designers on board with standards as early as possible in their careers.