Flex Talk: Additive Electronics—PCB Scale to IC Scale


Reading time ( words)

SAP, mSAP, SLP—what kind of crazy acronyms have we adopted now, and how much do you really need to know? In terms of consumer electronics, there is a good chance that the smartphone attached to your hand at all times contains a PCB fabricated with this technology—or at the very least, the next-generation smartphone that you purchase will utilize mSAP technology. In terms of current-day PCB design and fabrication, that really depends on where you are now with technology. The standard subtractive-etch process serves the industry well. Developments in materials, chemistry and equipment enable the traditional PCB fabrication process to achieve feature sizes such as line and space down to 30 microns. Larger shops with more sophisticated capabilities are building this technology today. Mainstream PCB manufacturing is often limited to 50-75 microns (µm) line and space. But the electronics industry is evolving quickly. Propelled by the demand for more sophisticated electronics, the PCB design is being tasked with finer lines, thinner materials and smaller via sizes. A traditional progression is to first move to HDI technology with microvias and multiple lamination cycles for fabrication. Today’s mSAP and SAP technology offers an advanced approach, with line and space capabilities of less than 25 microns, to meet these exceedingly complex design requirements.

A Few Definitions

  • Subtractive etch process: commonly used to fabricate printed circuit boards. This process begins with copper-clad laminate, which is masked and etched (copper is subtracted) to form traces
  • Additive PCB fabrication: this process utilizes additive process steps, rather than subtractive process steps to form traces
  • SAP: semi-additive process, adopted from IC fabrication practices
  • mSAP: modified semi-additive process, adopted from IC fabrication practices
  • SLP: substrate-like PCB; a PCB using mSAP or SAP technology instead of subtractive etch technology

To read the full version of this article which originally appeared in the September 2018 issue of PCB007 Magazine, click here.

Share

Print


Suggested Items

Shaun Tibbals and Electra Polymer: Finding the Silver Linings in COVID-19

07/09/2020 | Nolan Johnson, PCB007
On July 8, Nolan Johnson spoke with Shaun Tibbals, sales and marketing director for Electra Polymers. Shaun discusses the Electra Polymer’s business outlook responses to the ongoing COVID-19 outbreak.

Nano Dimension Appoints LM Instruments to Market PCB/Hi-PEDs 3D-Printers

07/09/2020 | Globe Newswire
Nano Dimension Ltd., a leading Additively Manufactured Electronics (AME)/PE (Printed Electronics) provider, has signed an agreement with LM Instruments, which will represent Nano Dimension in the Mid-Atlantic States by marketing its 3D-Fabrication Machines for High-Performance Electronic Devices (Hi-PEDs).

IPC: Shawn DuBravac and Chris Mitchell on USMCA

07/02/2020 | Nolan Johnson, I-Connect007
On July 1, 2020, the USMCA trade act (United States-Mexico-Canada Act) phased in as a trade agreement guiding economic trade and growth in North America. Nolan Johnson spoke with both Shawn DuBravac, IPC’s chief economist, and Chris Mitchell, IPC’s vice president of global government affairs and an I-Connect007 columnist, about the impact of USMCA on North American electronics manufacturing.



Copyright © 2020 I-Connect007. All rights reserved.