More Than 11.2 Million Vehicles Will Be Equipped With V2X Communications in 2024
May 17, 2019 | IHS MarkitEstimated reading time: 3 minutes
More than 11.2 million light vehicles equipped with some form of Vehicle-to-Everything (V2X) system will be produced globally in 2024, representing 12% of the light vehicle fleet, based on new research and forecasts from business information provider IHS Markit. It is expected that production of light vehicles equipped with V2X systems will be just under 15,000 units in 2019 and will grow at a compound annual growth rate (CAGR) of 277.5 percent in 2024.
The automotive telematics forecasts from IHS Markit analyze technology deployment, monitor OEM sourcing strategies and identify specific new business opportunities through a six-year forecast calendar of new programs. The data represents production forecasts of factory-installed telematics systems in new light vehicles.
A major driving force for the implementation of enhanced connectivity in vehicles today is the demand for safer roads and the minimization of road fatalities. While automatic crash notification systems are doing their part in this matrix, the introduction of V2X is expected to revolutionize the way consumers drive, if not the entire transportation system.
In the debate over which technology V2X should be based on, dedicated short-range communications (DSRC) solutions lead the global automotive V2X market in the near term as it represents a proven technology with chips for system implementation readily available from several semiconductor companies. By 2020, overall deployment numbers will still be relatively low, according to IHS Markit forecasts, but cellular V2X (C-V2X) solutions will already have surpassed DSRC based solutions, due to expected rapid deployment in China.
China is expected to lead the global V2X market, with an estimated 629,000 light vehicles produced in the region equipped with C-V2X technology in 2020, with the country expected to stay in the lead through to 2024. Europe is expected to be the second largest V2X market but with reliance mostly on DSRC-based solutions and just over 411,000 light vehicles produced during 2020. By 2023, Europe will also produce a significant amount of C-V2X based vehicles.
Japan and Korea also will achieve more noticeable deployments of DSRC-based solutions by 2021, showing a total of over 61,000 of such light vehicles produced between the two countries. In the North American market, production of C-V2X equipped cars is also expected to start in 2021 with just under 56,000 vehicles produced during that year. India isn’t expected to see any type of V2X production in vehicles until 2023, while the South America region falls outside of the forecast period (2017-2024) altogether.
“DSRC is a well-proven technology, but early testing of C-V2X based solutions are now being done by several companies,” said Anna Buettner, connected car principal analyst at IHS Markit. “C-V2X is gaining market momentum quickly in most regions and is likely to become the winning technology of choice over time, while a combined approach, in which both technologies are used, is also a real possibility in the near term while the technology is still developing.”
5G regulations are developing rapidly throughout many regions. Initial proposals made by governmental bodies, such as the one made by the European Commission in early March, could have potentially delayed cellular-based V2X deployment in Europe. However, since the announcement, the EU Parliament’s transport committee has come forward to reject the proposal alongside a number of OEMs. The latest vote by the European Commission now enables future 5G deployment, which would support C-V2X in automotive. Meanwhile, the US Federal Communications Commission has recently delayed a vote to once again review a key technology that would pave the way for DSRC in the United States, highlighting the differences in regional approach that exist within key regulatory bodies.
“While regulatory bodies can greatly influence the fate and speed of deployment of V2X technologies, the momentum of V2X technology development will not be slowed down at the OEM and supplier level. This technology is here to stay,” added Buettner.
About IHS Markit
IHS Markit is a world leader in critical information, analytics and solutions for the major industries and markets that drive economies worldwide. The company delivers next-generation information, analytics and solutions to customers in business, finance and government, improving their operational efficiency and providing deep insights that lead to well-informed, confident decisions. IHS Markit has more than 50,000 business and government customers, including 80 percent of the Fortune Global 500 and the world’s leading financial institutions. Headquartered in London, IHS Markit is committed to sustainable, profitable growth.
Suggested Items
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).
Microchip Technology Acquires Neuronix AI Labs
04/16/2024 | Microchip Technology Inc.Innovative technology enhances AI-enabled intelligent edge solutions and increases neural networking capabilities.
Incap Estonia Teamed Up With Solaride to Fuel Youth Excitement for The World of Engineering
04/11/2024 | IncapIncap Estonia partnered with Solaride to ignite enthusiasm among young people for the world of engineering and sustainable technology. Together, they organised an inspiring day for students from grades 7 through 12 in Saaremaa. Held at Incap’s Kuressaare factory, this event brought together over 130 young minds eager to explore the innovative world of technology and learn more about advanced electronics manufacturing.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.