Reading time ( words)
Ventec International Group Co., Ltd. will be showcasing its latest high-reliability PCB materials at two key industry trade shows in the US this month. The Ventec US team will be in Santa Clara (CA) at PCB West on 10 September (Booth #508) and our thermal management & IMS specialists will be at the Electric & Hybrid Vehicle Technology Expo in Novi (MI) on booth #1351 from 10-12 September.
Ventec will once again be exhibiting at one of the industry’s most important exhibitions for printed circuit board design, fabrication and assembly in the US. The Ventec US team will be on booth #508 to present the company’s unique laminate & prepreg capability across a very wide range of applications and budgets—all supported by a fast and efficient global delivery promise through Ventec's fully controlled and managed global supply chain and world-class dependable technical support.
A key focus will be Ventec’s extended ceramic-filled hydrocarbon thermoset material series tec-speed 20.0. The range combines unrivaled high-frequency performance (Dk 3.00-3.48 / Df 0.002-0.0037), superior loss characteristics and highest reliability particularly demanded by 5G applications. The extended tec-speed 20.0 range is designed for the world's most demanding high frequency PCB applications and is already proving to be very popular with customers requiring high-performance, reliable and cost-efficient high frequency materials.
Electric and Hybrid Vehicle Technology Expo, Novi (MI)
Ventec will once again be exhibiting at one of the industry’s most important exhibitions for printed circuit board design, fabrication and assembly in the US. The Ventec US team will be on booth #508 to present the company’s unique laminate & prepreg capability across a very wide range of applications and budgets—all supported by a fast and efficient global delivery promise through Ventec's fully controlled and managed global supply chain and world-class dependable technical support.
A key focus will be Ventec’s extended ceramic-filled hydrocarbon thermoset material series tec-speed 20.0. The range combines unrivaled high-frequency performance (Dk 3.00-3.48 / Df 0.002-0.0037), superior loss characteristics and highest reliability particularly demanded by 5G applications. The extended tec-speed 20.0 range is designed for the world's most demanding high frequency PCB applications and is already proving to be very popular with customers requiring high-performance, reliable and cost-efficient high frequency materials.
Electric and Hybrid Vehicle Technology Expo, Novi (MI)
From 10-12 September, visitors are invited to meet our thermal management & IMS specialists on booth #1351 to discover the latest advances in high performance IMS materials and thermally conductive prepregs and thin core laminates that deliver exceptional thermal performance, reliability and quality.
With the rise in new energy vehicles, automotive manufacturers around the world are already showing a keen interest and relying on Ventec's advanced range of high thermal conductivity, low-loss, heavy copper and black laminates, including:
- VT-4B5 SP, an aluminum base laminate that ensures maximum thermal efficiency for direct-to-metal connections of electrically isolated heat sources and places dielectric insulation only where needed
- VT-4B5L, a high performance IMS material that offers excellent solder joint reliability and thermal conductivity of 4.0 W/mK.
- VT-4B5H, a metal base laminate material with high Tg (180oC) and thermal conductivity of 4.2 W/mK, ideally suited for applications such as LED lighting, power conversion, monitor drives and power supply
- VT-4B7, a high performance IMS material for applications where maximum thermal conductivity and electrical performance are key. Specified at 7.0 W/mK, VT-4B7 is an affordably priced substrate that competes strongly with direct-bond copper (DBC)
About Ventec International Group
Ventec International is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network. For more information, visitwww.venteclaminates.com.
Visit I-007eBooks to download your copy of Ventec micro eBook today:
The Printed Circuit Designer's Guide to...Thermal Management with Insulated Metal Substrates
The Printed Circuit Designer's Guide to...Thermal Management with Insulated Metal Substrates
Share
PrintSuggested Items
Calumet Electronics and Averatek Team Up on A-SAP
12/02/2019 |
Nolan Johnson, PCB007
Nolan Johnson talks with Brian Hess of Calumet Electronics and Mike Vinson of Averatek about the new, insertable additive processes that the companies are working on together to help factories running primarily subtractive processes to quickly convert to very high-density interconnect (HDI) features, including trace and space from 2.5-mil line and space to 1-mil line and space and below.
Decreasing Bend Radius and Improving Reliability- Part II
11/22/2019 |
Kelsey Smith, All Flex
Many of the issues that arise when using a flex circuit come from a lack of knowledge about how to properly design one, especially when the circuit is required to bend. Many novices will design a circuit that calls for bending the flex in too tight of a bend radius, which can cause damage to the circuit and lower the reliability of the end product. This series of articles will focus on the seven key aspects to consider when designing for maximum durability and maximum “flexibility”.
Flex Standards Update With Nick Koop
11/21/2019 |
Andy Shaughnessy, Design007 Magazine
This month, I interviewed Nick Koop—director of flex technology at TTM Technologies, a veteran “flex guy” and instructor, and a leader of several IPC flex standards committees. Nick provides an update for the committees he’s involved with and discusses some of the challenges that he sees as more designers enter the world of flex.
