Brigitflex Invests in New Excellon Drilling/Routing System


Reading time ( words)

Excellon announces the installation of a model 154L vision drill/routing system at Brigitflex, Inc. of Elgin, Illinois, U.S.A.

The Excellon 154L vision drill/routing system offers high speed axis positioning via linear motor technology making quick work of large panel PCB’s up to 54 by 30 inches. The vision system provides capabilities such as drilling/routing relative to surface targets and features ensuring high accuracy and precise hole placement. This capability is especially important when working with thin materials, kapton, microwave and teflon substrates, that grow or shrink during the manufacturing process. The 154L is equipped with tight tolerance depth to +/- 0.0005 inches to enable accurate counter bore, counter sink and blind via drilling. The CNC-7PC control provides backward compatibility with earlier Excellon systems.

Brigitte Lawrence, president, relayed: “Brigitflex has paid attention to its customer base. We are always experimenting with new materials and upgrades for the ever-changing world we are part of. With the addition of the 154L we will not only have greater technical capability but we significantly increase our capacity for your needs now and in the future. Please give us call for your concepts, proto into production printed circuit boards. We can work with all materials plus thin film lamination in house. We work with a 60-inch-wide etcher. We can think outside the box!”

Mike Sparidaens, vice president of sales at Excellon, shared his comments: “Excellon welcomes Brigitflex into the next generation of drilling and fabrication with the new 154L drill router system.  We look forward to further developing our partnership and many years of success.”

About Brigitflex

Woman owned and operated with over 40 years’ experience in PCB fabrication specializing in large circuit boards, antenna boards, and multilayers located in Elgin, Illinois. Visit www.brigitflex.com for more information.

About Excellon

Excellon, an employee-owned company, is recognized worldwide as a leader in installed PCB Drilling systems with products ranging from single and multiple station mechanical drilling machines to hybrid laser precision via formation and routing systems. See www.excellon.com for more.

Share

Print


Suggested Items

Future Trends in Flying Probe Testing

11/29/2019 | I-Connect007 Editorial Team
Peter Brandt, director of sales for Europe and Japan at atg, sits down with Pete Starkey and Barry Matties, gives his views on market requirements and testing technologies, and explains how flying probe testing is becoming the industry standard at all levels of production—and in many cases, the only practicable solution.

Pollution Prevention Techniques: Rinse Water Reduction

08/30/2019 | Peter Moleux with contributions from Happy Holden
There are five general categories of common techniques for pollution prevention in a PCB fabrication facility: new processes to replace sources of pollution; extend the bath’s life; rinse water reduction; dragout reduction; and ventilation reduction. While this list is not all-inclusive, it provides an overview of the types of technologies used around the world that are important to consider. This article, examines rinse water reduction.

EPA, Industry Come Together in Visit to TTM Facility

07/18/2019 | Kelly Scanlon, director, EHS policy and research
IPC member TTM Technologies is proud to show off the new wastewater-treatment system at its Sterling, Virginia plant, which is helping to enhance the company’s pollution prevention and resource recovery performance.



Copyright © 2019 I-Connect007. All rights reserved.