Boeing Starliner Completes First Orbital Flight Test with Successful Landing
December 23, 2019 | BoeingEstimated reading time: 1 minute

The Boeing CST-100 Starliner's first mission ended historically today when it became the first American orbital space capsule to land on American soil rather than in an ocean.
The spacecraft's crew module landed at the U.S. Army's White Sands Missile Range at 5:48 a.m. Mountain time, after spending just over two days on orbit and checking off a number of flight test objectives. The last time a spacecraft landed at the historic White Sands Space Harbor runway was in 1982, when Space Shuttle Columbia touched down, ending its STS-3 mission.
Shortly after its December 20 launch and separation from its booster rocket, Starliner experienced a mission timing anomaly that made it use too much fuel to reach the intended destination of the International Space Station. Flight controllers were able to address the issue and put Starliner into a lower, stable orbit. The vehicle demonstrated key systems and capabilities before being signaled to return to Earth.
"The Starliner team's quick recovery and ability to achieve many mission objectives – including safe deorbit, re-entry and landing – is a testament to the people of Boeing who have dedicated years of their lives working toward the achievement of commercial human spaceflight," said John Mulholland, vice president and program manager of Boeing's Commercial Crew Program. "Their professionalism and collaboration with our NASA customer in challenging conditions allowed us to make the most of this mission."
The Starliner landing demonstrated the robustness of its landing systems, including its innovative parachutes and airbags.
Although this Starliner carried no people, it did have a passenger. An anthropometric test device, named "Rosie," was in the commander's seat for the entire mission. She was outfitted with about a dozen sensors that collected data to help prove Starliner is safe for future human crews.
Next, this crew module will be returned to Florida for data retrieval, analysis and refurbishment for future missions. It is the vehicle chosen to fly NASA astronauts Sunita "Suni" Williams and Josh Cassada, along with two international partner astronauts, on the first operational mission. In parallel, Boeing's Starliner team is finalizing the vehicle that will fly Boeing astronaut Chris Ferguson and NASA astronauts Mike Fincke and Nicole Mann on the Crewed Flight Test.
Suggested Items
Discover TRI Test Solutions at New-Tech 2025
05/08/2025 | TRIBynet Testing Systems, TRI's industry partner, will join New-Tech 2025 at EXPO Tel-Aviv, Pavilion 1 from May 20 – 21, 2025.
Datest Expands Presence in the Upper Midwest with Omni-Tec Partnership
05/05/2025 | DatestDatest, a trusted leader in advanced testing, engineering, inspection, and failure analysis services, is proud to announce its partnership with Gary Krieg of Omni-Tec, Inc. as its official sales representative in the Upper Midwest.
Northrop Grumman’s IVEWS Completes F-16 Electronic Warfare Operational Assessment
05/05/2025 | Northrop GrummanNorthrop Grumman Corporation’s IVEWS (Integrated Viper Electronic Warfare Suite) has successfully completed Operational Assessment flight testing on U.S. Air Force F-16 aircraft, demonstrating its effectiveness against advanced radar-guided threats.
Cadence Expands Design IP Portfolio Optimized for Intel 18A and Intel 18A-P Technologies, Advancing AI, HPC and Mobility Applications
05/01/2025 | Cadence Design SystemsCadence announced a significant expansion of its portfolio of design IP optimized for Intel 18A and Intel 18A-P technologies and certification of Cadence® digital and analog/custom design solutions for the latest Intel 18A process design kit (PDK).
The Knowledge Base: Unlocking the Invisible—The Critical Role of X-ray Technology
04/29/2025 | Mike Konrad -- Column: The Knowledge BaseFrom detecting voids under BGAs to solder defects in high-reliability applications, X-ray inspection has become an indispensable tool in modern manufacturing. But how is the technology evolving? What challenges do experts face in deploying X-ray inspection effectively and what does the future hold for this critical quality assurance method?