NeoPhotonics Unveils Complete L-Band Coherent Optics Solution to Double Optical Fiber Capacity
March 17, 2020 | NeoPhotonicsEstimated reading time: 2 minutes
NeoPhotonics Corporation, a leading developer and manufacturer of silicon photonics and advanced hybrid photonic integrated circuit based lasers, modules and subsystems for bandwidth-intensive, high speed optical networks, today announced an L-Band suite of coherent optical components, including its 64 GBaud L-Band High Bandwidth Coherent Driver Modulator (HB-CDM), 64 GBaud L-Band Intradyne Coherent Receiver (ICR) and ultra-narrow linewidth L-Band tunable laser Micro-ITLA. Together with NeoPhotonics standard C-Band coherent components, these new products enable customers to double the capacity of optical fiber links.
The C-Band is the primary band for telecommunications with wavelengths centered around 1550 nm. The L-Band uses wavelengths centered around 1590 nm and is primarily used to complement the C-Band to increase data capacity, especially in long-haul networks. By adding channels in the L-Band, operators can double the capacity of an optical fiber. NeoPhotonics 64 Gbaud coherent components and tunable lasers enable single channel 600G data transmission over short haul data center interconnect (DCI) links using 64 QAM. These components also support 400G over metro distances of 400-600 km using 64 GBaud and 16 QAM or 200G over long-haul distances of greater than 1000 km using 64 GBaud and QPSK.
The NeoPhotonics L-Band External Cavity (ECL) micro-ITLA incorporates the same laser architecture as our C-Band laser for a pure optical signal with an ultra-narrow linewidth and very low phase noise. In coherent systems, any error in the phase of the signal and reference lasers, due to the laser’s linewidth, can cause data errors, thereby making narrow linewidth critical in systems using higher order modulation.
The NeoPhotonics 64 Gbaud L-Band HB-CDM co-packages an Indium Phosphide based Mach-Zehnder (MZ) quadrature modulator chip with a linear, quad-channel, differential 64 GBaud driver. Both the C-Band and L-Band versions of the HB-CDM are designed to be compliant to the Optical Internetworking Forum (OIF) Implementation Agreement OIF-HB-CDM-01.0 “High Bandwidth Coherent Driver Modulator” (www.oiforum.com).
NeoPhotonics 64 Gbaud L-Band Micro-ICR incorporates an integrated comixer chip and four balanced photodiodes with four differential linear amplifiers to provide four output channels at 64 GBaud. The form factor of the High Bandwidth Coherent Receiver is designed to be compliant with the OIF Implementation Agreement for Micro Integrated Intradyne Coherent Receivers; IA # OIF-DPC-MRX-02.0.
For applications that require more capacity than provided by the standard C-Band, but do not require the full L-Band, each of these components is available in a “C++” version, which supports tuning across the full “Super C-band” covering 6.0 THz of spectrum or up to 50 percent more than standard systems. These C++ components can support 80 channels at 75 GHz channel spacing, which effectively increases the capacity of an optical fiber by as much as 50 percent over standard C-Band only systems at comparable distances.
"We are pleased to add L-Band versions to our existing suite of coherent components, thus providing customers with a complete solution to their fiber capacity requirements, whether C-Band, C++ Band or L-Band," said Tim Jenks, Chairman and CEO of NeoPhotonics. "Our ultra-pure tunable laser design and our high performance coherent modulator and receiver designs are very flexible and excel in different spectral regimes to provide the highest speed over distance performance," concluded Mr. Jenks.
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Indium to Showcase Sustainable Solder Paste and Alloy Technologies at Detroit Battery Show
10/03/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, automotive, electric vehicle (EV), thin-film, and thermal management markets, will feature a range of sustainable, high-reliability solder products at The Battery Show North America, to be held October 7-9 in Detroit, Michigan.
SMTA Next Gen 10 Emerging Leaders Announced
10/01/2025 | SMTAThe SMTA is proud to announce the Next Gen 10 award recipients for 2025. The program recognizes young leaders who demonstrate outstanding success in their careers and contributions to the electronics manufacturing industry.
Indium Commemorates 30th Anniversary of Asia-Pacific Hub in Singapore
09/30/2025 | Indium CorporationIndium Corporation, a leading materials manufacturer and supplier for global electronics markets, celebrates 30 years of service at its Asia-Pacific Operations (APO) facility.