EMA Design Automation Webinar Addresses Testing Challenges in PCB Design


Reading time ( words)

EMA Design Automation is offering a free webinar titled “What PCB Design Engineers Need to Know,” on Wednesday, July 29th from 2-3:00 p.m. EDT.

This webinar will focus on the importance of ensuring your PCB design is optimized for testing and how to implement testing capabilities during the schematic and layout phase to avoid testing challenges after the board has been manufactured.

Attendees will learn:

  • The importance of incorporating testing needs into your PCB design
  • What should be tested within your design and why to avoid shorts, bad parts, invisible parts etc.
  • Common test challenges and misconceptions
  • Tips and tricks on how to implement these test needs

To register for the webinar, please visit this link.

Share

Print


Suggested Items

Advances in Medical Diagnostics Using LoC and LoPCB Technologies

03/31/2020 | Pete Starkey and Happy Holden, I-Connect007
Several techniques for detection and diagnosis of COVID-19 are currently under development, some of which may detect the novel virus exclusively; others may also detect strains that are genetically similar. A detection kit recently announced uses technology based on a portable lab-on-chip (LoC) platform capable of detecting, identifying, and differentiating MERS-CoV, SARS-CoV, and COVID-2019 in a single test.

This Month in Design007 Magazine: Al Neves on Designing for Profitability

03/11/2020 | Andy Shaughnessy, Design007 Magazine
If your company is having trouble designing PCBs for profitability, where does the blame fall? Is it management’s fault for having inefficient processes, or is it the fault of the designers and design engineers for not keeping up to date with their training? During DesignCon, I asked Al Neves of Wild River Technology to weigh in on this question. As he explains, you and your manager might both be to blame for inefficiencies in the design process.

February Design007 Magazine: Eric Bogatin Looks at EMI Root Causes and Solutions

02/12/2020 | I-Connect007 Editorial Team
The I-Connect007 team recently spoke with design instructor and author Eric Bogatin about the EMI challenges facing PCB designers today. Eric is a “signal integrity evangelist” with Teledyne LeCroy, as well as an adjunct professor at the University of Colorado Boulder, and technical editor of the Signal Integrity Journal. In this interview, Eric explains why EMI is so prevalent and what designers and design engineers can do to avoid EMI from the start.



Copyright © 2020 I-Connect007. All rights reserved.