Samsung Unlocks Advanced Applications with 980 PRO
September 22, 2020 | Samsung ElectronicsEstimated reading time: 1 minute
Samsung Electronics, the world leader in advanced memory technology, unveiled the company’s first consumer PCIe 4.0 NVMe solid state drive (SSD) – the Samsung SSD 980 PRO.1 The new 980 PRO is designed for professionals and consumers who want cutting-edge performance in their high-end PCs, workstations and game consoles.
“Over the years, Samsung has continuously challenged the limits of high-speed flash memory storage solutions,” said Dr. Mike Mang, vice president of Memory Brand Product Biz at Samsung Electronics. “The new 980 PRO SSD reflects our continuing commitment to delivering exceptional products consumers have come to expect from Samsung.”
Optimized for handling data-intensive applications, the 980 PRO is ideal for consumers and professionals who work with 4K and 8K contents, and play graphics-heavy games. All the key components, including the custom Elpis controller, V-NAND and DRAM, are completely designed in-house to deliver the full potential of PCIe 4.0. This allows the 980 PRO to provide sequential read and write speeds of up to 7,000 MB/s and 5,000 MB/s respectively, as well as random read and write speeds of up to 1,000K IOPS,2 making it up to two times faster than PCIe 3.0 SSDs and up to 12.7 times faster than SATA SSDs.3
In addition to enhanced performance, the 980 PRO comes with outstanding thermal control solutions for improved reliability. While most of today’s high-performance NVMe SSDs rely on external copper heatsinks to diffuse heat, Samsung’s 980 PRO employs a nickel coating on the controller as well as a heat spreader label on the back side of the SSD for efficient thermal management. These innovative heat-dissipating functions also allow the drive to maintain its compact and slim M.2 form factor. Samsung’s Dynamic Thermal Guard technology further ensures that the drive’s temperature stays at the optimal level, minimizing performance fluctuations over the long haul.
Suggested Items
Trump Copper Tariffs Spark Concern
07/10/2025 | I-Connect007 Editorial TeamPresident Donald Trump stated on July 8 that he plans to impose a 50% tariff on copper imports, sparking concern in a global industry whose output is critical to electric vehicles, military hardware, semiconductors, and a wide range of consumer goods. According to Yahoo Finance, copper futures climbed over 2% following tariff confirmation.
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
07/09/2025 | Happy Holden -- Column: Happy’s Tech TalkWhen we consider via reliability, the major contributing factors are typically processing deviations. These can be subtle and not always visible. One particularly insightful column was by Mike Carano, “Causes of Plating Voids, Pre-electroless Copper,” where he outlined some of the possible causes of hole defects for both plated through-hole (PTH) and blind vias.
Trouble in Your Tank: Can You Drill the Perfect Hole?
07/07/2025 | Michael Carano -- Column: Trouble in Your TankIn the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.