NODAR Launches Hammerhead 3D Vision Platform for Mainstream Autonomy
January 7, 2021 | PRNewswireEstimated reading time: 2 minutes
NODAR, Inc. has released the first demonstration of its Hammerhead™ 3D vision platform, taking an important step towards truly safe, mainstream autonomous driving. NODAR Hammerhead™ produces high-density 3D point-clouds at ranges up to 1,000m with astonishing accuracy, eclipsing mono-camera and LiDAR performance and paving the way to L3 and higher autonomy. This unprecedented achievement includes small object detection at previously impossible ranges. In the demonstration released today, Hammerhead™ is used to detect and accurately measure the distance to a 10cm brick at a distance of 150m.
Reaching this milestone is groundbreaking in two key ways: 1) detecting unknown objects at 150m provides ample time to safely avoid collisions at highway speeds (4.5 seconds at 120kph/74mph) & 2) competitive solutions based on a single camera utilizing AI and inferencing may be able to detect known large objects at this range, however, many lethal obstructions will be unknown to these systems or too small, and will fail detection. NODAR's technology measures the physical environment in real-time, providing distance data for every pixel in view, regardless of whether an object is known or unknown.
Beyond small object detection, NODAR Hammerhead™ delivers a new level of safety where existing solutions fall flat. Mono-camera solutions relying on deep learning to estimate depth are inherently limited by finite training sets, compute requirements, and known object ambiguity (adult vs. child can introduce range error of 50%), exposing life-threatening uncertainty. Numerous fatal and highly publicized accidents in recent years serve to emphasize the shortcomings of existing systems. LiDARs rely on scanning beams and can easily miss small objects. The LiDAR scanning process takes precious time, whereas a camera-based system offers >20X the area coverage rate with the reliability, robustness, and low price of high volume solid-state cameras. Last, NODAR produces frame-by-frame disparity maps every 33 milliseconds while single-camera systems and LiDAR must aggregate and analyze data before producing results, causing significantly slower performance.
The significant advances in performance, accuracy, and reliability that NODAR brings will yield better performance around critical edge cases, higher levels of safety and an increase in lives saved, at lower cost than current approaches.
Bio-inspired by the hammerhead shark, which has the best depth perception in the animal kingdom due to the wide separation between its eyes, NODAR Hammerhead™ uses data from multiple cameras to calculate real physical measurements of distance to targets. The unique advantage of NODAR's system is the ability to mount the cameras independently in long-baseline configurations, such as in the sideview mirrors, headlamps, or on the roof. With highly accurate long-range 3D sensing and no reliance upon inferred measurements, Hammerhead™ accurately captures instances of banked roads, disabled vehicles, and road debris - edge cases that other vision systems will miss.
Leaf Jiang, NODAR founder and CEO, speaks to the significance of today's demonstration: "The automotive world knows that current ADAS systems must advance to ensure human safety. Today, we've taken a fundamental step towards demonstrating that higher levels of automated driving are achievable with existing sensor technology in the immediate term. At NODAR we believe autonomy should never compromise safety, and that a camera-based solution is the only way to deliver on the performance, safety, and pricing requirements of the mainstream automotive market."
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.