Economic LED Recycling
November 3, 2015 | Fraunhofer-GesellschaftEstimated reading time: 2 minutes
Light emitting diodes are used in a great number of products like televisions and lamps or luminaires. Moreover they are penetrating the automotive lighting market to an ever greater degree. Nevertheless, there are no suitable recycling processes available today for these items. Researchers have developed a method to mechanically separate LEDs.
Modern illuminants are manufactured using a variety of materials. The housing is made of glass or plastic, the heat sink consists of ceramic or aluminum, and the resistors and cables contain copper. The most valuable materials are found within the LEDs themselves. They are indium and gallium inside the semiconductor diode and rare earths like europium or terbium in the phosphor. This makes it relatively expensive to manufacture the diodes, and the margins are small. “Right now recyclers are starting to receive LED products, but currently they are often simply stored as there is no suitable recycling process available yet. The main goal is to recover the valuable materials. It’s only a matter of time until recyclers will have to start processing LEDs,” says Jörg Zimmermann from the Fraunhofer Project Group for Materials Recycling and Resource Strategies IWKS in Alzenau and Hanau of the Fraunhofer Institute for Silicate Research ISC.
Separating components with the help of shock waves
Using the “electrohydraulic comminution” process, researchers break the LED lamps into their constituent parts without destroying the LEDs themselves. Shock waves created by electrical impulses in a water bath separate the individual components at their predetermined break points. The components can then be recycled individually. The researchers have adapted their experimental setup to retrofit lamps, which resemble traditional light bulbs or fluorescent tubes and can be used in the same standard sockets. “This method works in principle also for other sizes, for instance with LEDs from television sets or with automobile headlights, as well as with other electronic products,” explains Zimmermann.
A prerequisite for an efficient recycling process is a neat separation of the components. “To efficiently separate and recycle all components of a LED lamp, an entirely different approach is necessary - one that produces large quantities of semiconductor and phosphor materials,” says Zimmermann. If the entire retrofit is shredded, it is much more difficult to separate the resulting mixture of materials. Breaking LED lamps down to the component level also makes it easier to recover greater quantities of the materials contained in them. This is accomplished by collecting large quantities of similar components in which the concentration of individual elements is already higher. Zimmermann clarifies that this reprocessing is only profitable for recyclers and manufacturers, if it involves larger quantities.
“We’re still testing whether the comminution process can be repeated until the desired materials have been separated,” says Zimmerman. The researchers can adjust the parameters of the experimental setup like the type and quantity of the fluid, the container size, or the electric pulse voltage in such a way that separation occurs precisely at the specified break points. “In particular it is the number of pulses that determines how the components will separate,” he says. The electrohydraulic comminution process is currently being investigated in detail and improved further, also to gain access to other LED application areas. “Our research has demonstrated that mechanical separation is a viable method for improving the economics of LED lamp recycling,” says Zimmermann.
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.