Trouble in Your Tank: Understanding Interconnect Defects, Part 1
It’s Only Common Sense: Marketing Isn’t Fluff, It’s Ammunition
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
Last Days to Comment on Automotive Addendum IPC-6012DA
June 1, 2018 | ElmaticaEstimated reading time: 1 minute
The deadline for comments to the Final Draft for Industry Review of IPC-6012DA with Amendment 1, Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards, is fast approaching.
Jan Pedersen, senior technical advisor at Elmatica AS and the chair of the task group developing the standard, is urging the industry to take a final look before the final result goes for the ballot.
“The idea behind the automotive addendum was to find a consensus in the jungle of corporate specifications, a common document describing basic PCB requirements for the automotive industry. IPC-6012DA was published in April 2016, the work with the Amendment started in April 2017. A year later, we have made some important changes that will impact the automotive industry,” says Pedersen.
Pedersen believes the Amendment will bring the automotive requirements for both users and suppliers up to an even more standardized level. Next week at the IPC Reliability Forum in Nuremberg, the addendum will be presented full scale.
“I am very excited to present the addendum. The changes of the revised version are of substantial character. Some of the features the Addendum addresses are, among others, cleanliness, solder mask thickness, and wicking. However, that is next week; there is still time for the industry or anyone interested to review and comment. The deadline for commenting is Monday, June 4,” says Pedersen. “We have now managed to have Tier 1 companies join the task group, but above all, they are using the standard. We are on our way from a myriad of automotive corporate standards to one document that describes a consensus on the most important terms and requirements. From the early start, we had some challenges getting attention from the automotive industry, where you generally find huge global players with their own rules and requirements.”
“I would like to address a special thanks to Jan Pedersen for leading the D-33aa Task Group during the development of the Amendment to the IPC-6012DA. The IPC D-33aa Task Group will begin addressing comments on Tuesday, June 5, 2018 at the IPC Automotive Electronics Reliability Forum in Nuremberg, Germany, and will continue through subsequent task group web conferences,” says John Perry, Director, Printed Board Standards & Technology at IPC.
The deadline for comments to the IPC-6012DA with Amendment 1 is Monday, June 4, 2018, via the following IPC KAVI Public Documents Link: https://ipc.kavi.com/kws/public/documents?view=.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
EIPC Technical Snapshot: Sustainability in Electronics Manufacturing
11/06/2025 | Pete Starkey, I-Connect007EIPC selected the highly topical issue of sustainability in electronics manufacturing for the 24th Technical Snapshot webinar on Oct. 29, with guest speakers Satoshi Konagai of Elephantech and Liisa Hakola of the VTT Technical Research Centre of Finland. The program was moderated by Kirsten Smit-Westenberg, executive director of EIPC, who also introduced each speaker.
Target Condition: Distribution of Power—Denounce the Ounce
11/05/2025 | Kelly Dack -- Column: Target ConditionHave you ever wondered why the PCB design segment uses ounces to describe copper thickness? There’s a story behind all of this—a story that’s old, dusty, and more than a little absurd. (Note that I didn’t add “Like many of us.”) Legend has it that back in the days of copper tinkers and roofing tradesmen, the standard was set when a craftsman hammered out a sheet of copper until it weighed one ounce, when its area conveniently matched the square of the king’s foot.
Life Is a Highway: A Family of 8 Turned the Entire U.S. Into a Learning and Working Environment
11/04/2025 | Steven Bowles, Lockheed MartinIt’s 6:45 a.m. in a modern A-frame cabin tucked into the misty edges of the Cascade Range in Arlington, Washington. I’ve just made a quick Nespresso, checked my calendar of virtual meetings, and verified the Airbnb’s Wi-Fi speed is holding steady. In the next room, my wife Lynsey corrals our six kids into breakfast while planning a day trip to Seattle’s Children’s Museum. By 7:30, I’m camera-ready in a makeshift office nook, leading a discussion on HDI PCB design for an IPC standards committee. After a busy day, our Bowles crew, ranging in age from 1 to 10 years old, is hands-on with activities and exhibits in the museum.
TTM Technologies Receives Two Awards from the Global Electronics Association at the 2025 IPC CEMAC Conference
11/03/2025 | Globe NewswireTTM Technologies, Inc. announced that two of its team members received prestigious Asia Steering Committee Outstanding Service Awards from the Global Electronics Association (formerly named IPC connecting global electronics industry) at the 2025 IPC CEMAC Electronics Manufacturing Annual Conference in Shanghai.
TTCI Brings Hands-On Test Engineering and IPC Training Expertise to PCB Carolina 2025
10/31/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions, and The Training Connection LLC (TTC-LLC) will exhibit at PCB Carolina on Wednesday, November 12, 2025, at the McKimmon Center at NC State University in Raleigh, North Carolina. Attendees can visit Table 4 to say hello to Bert Horner and Bill Graver, and learn more about their test engineering services and technical training programs.