Candor Builds PCB with Press-Fit Copper Coins, Selective Hard Gold


Reading time ( words)

Toronto PCB fabricator, Candor Circuits has built boards with press fitted copper coins and selective hard gold.

Candor is able to press fit and plate over copper coin in the middle of PCB surface areas. This technique allows for thermal management in small profiles. With smaller density parts and higher power, thermal management requires a great deal of experience, know how, and a drive to innovate. Candor’s commitment to producing complex PCB boards quickly has allowed them to excel in thermal management.

Candor’s Technical Sales Manager Sunny Patel commented, “The copper coin selective hard gold plating is a process we can do in faster lead times allowing companies to prototype rapidly with peace of mind.

About Candor Industries

Since 1999, Candor Industries has provided 21st Century customers with innovative PCB solutions for complex technologies through a commitment to service and support. Limitations created by standard manufacturing methods led Candor to invent and develop certain technological advancements, helping them to emerge in the forefront as a top of the line solutions provider. Candor continues to push the envelope of PCB manufacturing through continuous R&D, helping both customers and the industry to a brighter future.  For more information about Candor, visit them on the web at www.candorind.com.

Share

Print


Suggested Items

The Institute of Circuit Technology Autumn Seminar

10/03/2019 | Pete Starkey, I-Connect007
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.