Driving Innovation: Direct Imaging vs. Conventional Exposure
It’s Only Common Sense: Selling to Today's Generation of Buyers
Dan’s Biz Bookshelf: ‘Believe in Better'
ATS Extrusion Profile Heat Sink Solutions Offer Cost-Effective Flexibility
June 9, 2020 | New Yorker Electronics Co.Estimated reading time: 1 minute
New Yorker Electronics has announced the global distribution of the newly expanded line of Heat Sink Extrusions from Advanced Thermal Solutions (ATS). The Extrusion Profiles series is comprised of aluminum alloy, the most cost-effective solution for the majority of electronic cooling applications.
The standard bar length is 300mm for easier design prototype manufacturing, however ATS maintains a vast inventory of profiles in a wide variety of sizes. In addition, engineers and designers can cut the extrusion bar to the appropriate heat sink design. This also works particularly well for MIL applications that cannot reveal project details. The ATS Extrusion Profile series is also well-matched to Altera, AMD, Freescale, Intel, TI and Xilinx applications.
The Extrusion Profiles are available in Straight Fin, STAR LED and Linear LED designs and custom finishes (anodization) available upon request. Other types of Heat Sink Extrusions from ATS include Straight Fin Extrusions, Slant Fin Extrusions, Pin Fin Extrusions and LED Extrusions. These high aspect ratio heat sinks are ideal for applications where there is adequate airflow to take optimum advantage from these designs.
ATS also offers an array of heat sink extrusion profiles with different thermal performances, fin-to-fin spacing, lengths and heights. Extrusion profiles enable engineers to either select or start their design from a pre-tooled extrusion profile for the cooling solution. There is no MOQ and no NRE required; so for standard extrusion profile or design expertise, New Yorker Electronics is able to fulfill orders quickly.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?
Beyond Design: The Metamorphosis of the PCB Router
06/18/2025 | Barry Olney -- Column: Beyond DesignThe traditional PCB design process is often time-consuming and labor-intensive. Routing a complex PCB layout can consume up to 30% of a designer’s time, and addressing this issue is not straightforward. We have all encountered this scenario: You spend hours setting the constraints and finally hit the Go button, only to be surprised by the lack of visual appeal and the obvious flaws in the result.