-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueSales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
The Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
CES 2015: Preview and Predictions
January 5, 2015 | Dan Feinberg, FeinLine Associates, Inc.Estimated reading time: 3 minutes

Once again, I'm preparing to head to Las Vegas for the annual CES show. I'm trying to set priorities regarding who to visit and what to see. It's impossible to see everything, especially now that this gigantic show has spread out with exhibits not only filling the Las Vegas Convention Center, but also now areas at Sands, The Venetian, and Madalay Bay.
Looking back over the last five years of CES and analyzing predictions and items featured by the large exhibitors, you'd likely assume the 2015 show would feature more advanced 3D TVs, as they were predicted to take over the market...wrong!
Last year seemed to promise the end of the PC era and the beginning of a majority using touch interface tablets...again, wrong! In fact, after experimenting with tablets and Net/Chrome books, many companies and individuals are upgrading or replacing their older PCs at a rapid rate. I received several invitations to see new PC components and keyboards. The PC era is far from over--it's actually seeing a bit of a rebirth.
As for displays, the prediction was that the age of the so-called Hi-Def 1080p monitors at an end. That prediction seems correct, but while 4K is becoming main stream, it seems as though the next geneneration of 5K or higher resolution monitors and TVs is almost upon us. The question is: What graphics hardware will power them? My guess is that NVIDIA and AMD will tell us this week.
What do I expect to see and, more importantly, what will we see that will actually be mainstream in two or three years (unlike the 3D TV and an all tablet world)?
Here are my guesses:
- We'll see a great deal of hype about the Internet of Things, but I predict that cost and the pain of implementation will prevent this from becoming fully mainstream except in certain areas like fitness.
- We'll see a slew of smart watches, not only at CES, but later in the year from Apple and others. The talk is that everyone will want or will have a wearable device. My prediction is that unless they do far more than become a remote display or control for your smartphone they will be far from mainstream. The exception, again, being health- or fitness-related wearables.
Page 1 of 2
Suggested Items
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/16/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
Arrow Electronics Launches Engineering Solutions Center to Support Tech Innovation Across India and Southeast Asia
07/09/2025 | Arrow ElectronicsArrow Electronics, a global provider of technology solutions, announced the launch of its new Engineering Solutions Center(ESC) in Bangalore, India.
I-Connect007’s Editor’s Choice: Five Must-Reads for the Week
07/04/2025 | Marcy LaRont, I-Connect007For our industry, we have seen several bullish market announcements over the past few weeks, including one this week by IDC on the massive growth in the global server market. We’re also closely watching global trade and nearshoring. One good example of successful nearshoring is Rehm Thermal Systems, which celebrates its 10th anniversary in Mexico and the official opening of its new building in Guadalajara.
Count On Tools Recognizes Donna Orr’s Ongoing Leadership and Impact Across 27+ Years
06/26/2025 | Count On ToolsCount On Tools, Inc. (COT), a leading provider of precision components and SMT spare parts, is proud to recognize Donna Orr, Executive Manager, for her continued dedication and leadership as she marks more than 27 years with the company.
A Record Year for the 75th Annual IEEE Electronic Components and Technology Conference (ECTC)
06/26/2025 | ECTCThe 75th annual 2025 IEEE Electronic Components and Technology Conference (ECTC), held at the Gaylord Texan Resort & Convention Center here May 27-30, had record attendance, a record number of paper submissions/presentations, record international and student participation, and a record number of exhibitors in a sold-out exhibition hall: