Engineered Materials Systems Debuts New Conductive Adhesive


Reading time ( words)

Engineered Materials Systems, a leading global supplier of conductive interconnect materials for circuit assembly applications, announces the introduction of its new EMS 618-15 Adhesive. The room temperature cure two-part conductive adhesive has been designed for circuit assembly applications.

EMS 618-15 is designed to cure in 24-hours at room temperature or rapidly at elevated temperatures. The material has a ten-to-one mix ratio and is available in a two syringe packaging system designed for use with static mix heads. EMS 618-15 forms high strength, high reliability conductive interconnects.

The EMS 618-15 conductive adhesive is the latest addition to Engineered Conductive Materials’ full line of conductive adhesives for circuit assembly applications.

For more information about the EMS 618-15 Room Temperature Cure Conductive Adhesive or to learn how Engineered Material Systems can define, develop and create an engineered material solution that is right for your company, visit www.emsadhesives.com.

About Engineered Material Systems

Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future. For more information, visit www.emsadhesives.com.

Share

Print


Suggested Items

PCB Design Training: More Critical Than Ever

09/05/2019 | Andy Shaughnessy, Design007 Magazine
I interviewed Gary Ferrari of FTG at the IPC High-Reliability Forum and Microvia Summit in Baltimore. Gary is a co-founder of the IPC Designers Council and a longtime advocate for PCB design and PCB designers. We discussed the crucial role that PCB designers play in the entire electronics development process, and how IPC and the Designers Council are helping to educate and inform the next generation of designers.

Conformal Coating Selection: Conventional vs. Two-part

08/14/2019 | Phil Kinner, Electrolube
As assemblies become more densely populated, and housing/casing designs become more permeable to save weight, the use of conformal coatings is essential to protect the assembly from its operating environment and ensure acceptable reliability for the application intended, especially when operating in hostile environments.

Low-Temperature SMT Solder Evaluation

07/05/2019 | H. Osgood, D. Geiger, R. Pennings, C. Biederman, J. Jiang, and J. Bernal, Flex Inc.
Until recently, the use of Sn/Bi-based SMT solder materials has been investigated with negative consequences for high strain rate (drop-shock) applications; thus, these alloys have been avoided. Recent advances in alloy 'doping' have opened the door to revisit Sn/Bi alloys as a possible alternative to SAC-305 for many applications.



Copyright © 2019 I-Connect007. All rights reserved.