Robots Secure Competitiveness and Jobs
June 12, 2015 | VDMAEstimated reading time: 5 minutes
In the past years, robots have considerably contributed to economic growth and prosperity worldwide. "The use of robotics and automation offers outstanding opportunities for stable economic development, high-quality and ergonomic jobs as well as safe and affordable products," Patrick Schwarzkopf, Managing Director of the VDMA trade association Robotics + Automation, said at the annual press conference in Frankfurt on Thursday. "Worries about a future where robots snatch people’s jobs away are unfounded. Humans and robots are a winning combination. Even sensational reports to the contrary cannot blind us to this fact," says Schwarzkopf. The German robotics and automation sector saw a new record in 2014 by achieving a turnover increase of 9 percent to 11.4 billion euros. In the current year a turnover growth of 5 percent is expected.
"Prospects are good that the industry will reach the turnover mark of 12 billion euros by the end of the year," said Hans-Dieter Baumtrog, Chairman of VDMA Robotics + Automation. In the first four months of 2015, order intake exceeded last year's level by 11 percent. Demand came mainly from abroad. In 2014, exports already accounted for
55 percent. The largest export market is China where investments are increasingly being made in automation technology in order to advance into technologically advanced markets in the future.
No paradox – robots and jobs
Example German automotive industry: Being by far the largest customer sector, the automotive industry expanded its population of industrial ro-bots in Germany by 15 percent up to 92,000 units between 2010 and 2014. In the same period its number of employees increased by 10 per-cent to 775,000. This shows that the prevailing fear that automation takes people’s jobs away is unfounded. Meanwhile in many instances the direct collaboration of humans and robots is possible. Sensor technology makes robots so safe that they can do without protective fences.
Example North America: The country is bringing industries back home which it had outsourced to low-wage countries years ago. The Ameri-cans realised that a strong industrial basis is important for consistent growth. However, this re-shoring is only possible because enterprises have become more competitive by adopting automation.
ING-DiBa robot study not useful
With its study "The robots are coming – consequences of automation for the German labour market", the ING-DiBa bank caused a great stir in April. According to the survey 59 percent of jobs examined in Germany would be in danger sooner or later due to increasing automation. This would correspond to 18 million jobs. The chances opened up by use of robots for new professions and employments, however, are not quanti-fied. Instead, an unrealistic assessment of technology leads to a distor-tion of reality. The authors claim for example that 1.9 million office clerks and secretaries would be robotised, merely 250,000 jobs would remain. "In our view this is not at all a realistic assumption," says Schwarzkopf. The German Federal Ministry of Labour has verified the automation po-tential, not in terms of profession but in terms of tasks performed. The result was that only about 12 percent of all jobs show a profile with high automation probability.
The study "Robots at Work" published in February 2015 analyses the impact of increasing automation on the economic development of 17 countries. Its authors Georg Graetz of Uppsala University and Guy Michaels of the London School of Economics, however, come to a dif-ferent conclusion. On average a good 10% of GDP-growth and 15% of the productivity gains were attributable to increased robot use. The ex-perts did not find a reduction of employment but rather an increase of wages. "From this we conclude that technical progress has made human work more valuable", Schwarzkopf said.
In 2013, the international robot association IFR already discovered in its study "Positive Impact of Robots on Employment" that per robot used, three to five jobs are newly created in manufacturing.
The positive impact can also be seen in the German economy: The robot population increased by almost 20 percent to 176,000 units between 2010 and 2014. In the same period, overall employment rose by 1.6 mil-lion, reaching 42.58 million. In the past five years, 100,000 new jobs were created in the mechanical engineering industry alone. This sector currently employs 1,008,000 people.
Record turnover in all sub-sectors
Robotics as a sub-sector of robotics and automation increased its turn-over by 7 percent, reaching 3.3 billion euros in 2014. Machine vision – ranging from optical quality inspection to automated toll road enforce-ment – recorded the largest increase of 16 percent, reaching 1.9 billion euros. The turnover of integrated assembly solutions, i.e. components and systems for assembly and handling, increased by 8 percent to 6.2 billion euros. In the course of this growth the number of employees in the entire sector rose by 3 percent, reaching almost 52,000. It is expected that employment figures will rise considerably in the next years.
Robotics on the increase worldwide
According to an IFR survey more than 225,000 robots were newly in-stalled in 2014. This corresponds to a rise of 27 percent compared to the previous year. Europe showed a comparatively moderate growth rate of 4 percent, whereas North America had a more substantial rate of 8 percent. Installation of robots in Asia increased by 42 percent, mainly driven by China. "China does not content itself with employing robots. It is the express strategy of the Chinese government to become a strong and innovative robot country," says association representative Baumtrog.
The growing interest in robotics worldwide is also reflected in the record participation in AUTOMATICA, the leading trade fair of the industry, tak-ing place in Munich next year. Even today, a year earlier, 91 percent of the exhibition space has been booked. AUTOMATICA presents the new possibilities of production optimisation: Industry 4.0, human-robot col-laboration and professional service robotics.
Do you have further questions? Patrick Schwarzkopf, Managing Director of the VDMA Robotics + Automation, will be pleased to answer them:
Telephone: +49 69 6603-1590, E-Mail: patrick.schwarzkopf@vdma.org
About VDMA Robotics + Automation:
The VDMA represents over 3,100 mainly small and medium size member com-panies in the engineering industry, making it one of the largest and most impor-tant industrial federations in Europe. VDMA Robotics + Automation forms an own association within the VDMA which unites more than 240 members: com-panies offering components and systems from the areas of robotics, integrated assembly solutions and machine vision. The objective of this industry-driven platform is to support the robotics and automation sector through a wide spectrum of activities and services. Current activities include statistics and market surveys, marketing services, standardization, public relations, trade fair policy, networking events and conferences. Find out more at: www.vdma.com/r+a
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
10/31/2025 | Nolan Johnson, I-Connect007Last week, the IMPACT conference took place in Taipei, bringing together advanced packaging experts from around the globe to share their knowledge. We’ll be bringing you post-conference coverage over the next few weeks, so look for that in our newsletters, and in the Advanced Electronic Packaging Digest. Other news seemed to have the U.S. at the center of the global discussions. My picks start in Phoenix, where TSMC, NVIDIA, and Amkor are all scrambling to establish new capabilities. There’s nothing like a strong demand signal to cause build-out, and AI chips are doing exactly that.
I-Connect007 Welcomes New Columnist: Leo Lambert, EPTAC
10/30/2025 | I-Connect007I-Connect007 is excited to announce a column by Leo Lambert, an industry veteran with 40 years of experience, an award winner, and technical director at EPTAC. This column, Learning With Leo, will explore the evolution and related challenges of electronics product assembly, especially as it relates to training.
Better Sustainability Policies for Electronics
10/29/2025 | Diana Radovan, Global Electronics AssociationI joined the Global Electronics Association in August 2025 as the director of sustainability policy. Since then, much has happened in terms of geopolitics and in the development and re-envisioning of sustainability policies in the industry. While the European Commission has released several legislative packages to simplify sustainability requirements (“omnibus”), these developments haven’t yet settled and are not in effect. Given the many recent and ongoing public consultations, with often conflicting input from a broad range of stakeholders, final negotiations remain rather polarized among policymakers.
SMTAI 2025 Review: Reflecting on a Pragmatic and Forward-looking Industry
10/27/2025 | Marcy LaRont, I-Connect007Leaving the show floor on the final afternoon of SMTA International last week in Rosemont, Illinois, it was clear that the show remains a grounded, technically driven event that delivers a solid program, good networking, and an easy space to commune with industry colleagues and meet with customers.
Come Together: Tom Marktscheffel Used Data to Build CFX and a Global Factory Standard
10/27/2025 | Sandy Gentry, Community MagazineWhen Tom Marktscheffel, director of product management software solutions at ASMPT, looks back on his nearly three decades in electronics manufacturing, one word stands out: data. “Data is the new gold,” he says. Without it, automation, artificial intelligence, and the factory of the future are impossible. With it, the industry can move from manual, error-prone processes to smart, connected systems that make real-time decisions.