Multilayer Technology Passes AS9100 Surveillance Audit


Reading time ( words)

Multilayer Technology (MLT), located in Irving, Texas has passed its AS9100C surveillance audits. The audit consisted of 2.5 days (20 hours) of intense auditing by our registrar. All departments were completely audited to ensure compliance to the AS9100C Certification. This audit marks the five-year anniversary that Multilayer Technology has maintained this highly prestigious certification.

Viny Mulani president of Multilayer offered the following, “The organization has continued to benefit in all 3 critical audit areas- Sales, Purchasing and Production.” The surveillance process is more than just an audit; it is an honest third-party evaluation of how our corporation functions on a daily basis and highlights areas for improvement that our internal audits may not disclose.”

Multilayer Technology utilizes internal IPC certified auditors to conduct all ongoing audits. The internal audit process always yields valuable insight into potential modification to our current processes and/or procedures however it is highly beneficial to have the 3rd party audit and allow us to make corrections to proactively avoid any potential impact on the customer product quality, performance and/or delivery.

The results of this audit turned out to be quite exceptional with the operations and purchasing departments receiving a rating of 3 and sales department with a rating of 4, the highest possible. This was no doubt due to the company's commitment to this process as well as the diligence of the quality department to maintain this certification.

Share

Print


Suggested Items

The Advantages of Non-sludge Acid Copper Products

09/04/2019 | Barry Matties, I-Connect007
Mike Wood, technical director with Cerambus Asia Pacific, discusses the acid copper product from Cerambus Technology Inc. that doesn't generate sludge during the plating process and operates at higher production output by using higher current density. He talks about why this is important for the state of the vertical continuous plating (VCP) market in Asia, and the trends he’s seeing in that space.

The State of Plating

09/03/2019 | Marc Ladle, Viking Test Ltd.
Increasingly, PCB design technology utilises buried and blind via holes and plated via fill is also becoming more and more common. The buried and blind holes mean that the loading on the plating equipment is multiplied by the number of different inner layer connections. The same technology means that equipment needs to deal with thinner and thinner materials.

Innovative Electroplating Processes for IC Substrates

08/27/2019 | S. Dharmarathna, S. Maddux, C. Benjamin, I. Li, W. Bowerman, K. Feng, and J. Watkowski, MacDermid Alpha Electronics Solutions
The decreasing chip scales and smaller line/spacing distances have created unique challenges for both the PCB industry and the semiconductor industry. This paper discusses innovative additive packages for direct-current copper electroplating specifically for IC substrates, which offer better trace profile and deliver via fill and through-hole plating. It also describes two electrolytic copper plating processes, the selection of which could be based on the via size and the dimple requirements of the application.



Copyright © 2019 I-Connect007. All rights reserved.