RTW IPC APEX EXPO: Mentor Graphics Finishes Traceability Standard in Record Time


Reading time ( words)

Michael Ford of Mentor Graphics and Editor Andy Shaughnessy discuss Mentor's work with traceability processes, including the new IPC traceability standard that was finished in record time. He also talks about their case study with Phoenix Contact.

Watch The Interview Here

Share

Print


Suggested Items

Seven Key Steps to Selecting a New EMS Partner

08/14/2019 | Neil Sharp, JJS Manufacturing
Choosing to outsource your electronics manufacturing to an EMS provider requires careful planning and consideration. And even once you’ve made your decision, there may still be things that test you or that don’t go quite to plan. An experienced EMS partner has been there before; they understand the challenges, and they’ll be able to support you through the process to ensure you achieve your goals.

Which Matters Most: Unit Cost or Total Cost of Supply?

08/09/2019 | Neil Sharp, JJS Manufacturing
The primary objective for any OEM is to design, manufacture, and deliver high-quality products in the most cost-effective way possible. When demand patterns change, or there is an increase in competition, it can be easy to rely on the calculation of unit cost to relieve the price pressure. But, as many manufacturers are discovering, choosing to base their outsourcing decisions purely on unit cost may not always reap the expected benefits in the long term.

ICT or Flying Probe: Which Test Is Best for Your Assembly?

07/10/2019 | Russell Poppe, JJS Manufacturing
In-circuit test (ICT) and flying probe are two of the most popular types of automated test equipment (ATE) used in electronic printed circuit board assembly (PCBA).



Copyright © 2019 I-Connect007. All rights reserved.