STI Accomplished AS9100D Certification


Reading time ( words)

STI Electronics, Inc., a full-service organization providing training services, training materials, analytical/failure analysis, prototyping, and small-to-medium volume contract PCB assembly, is pleased to announce that it has earned its AS9100D certification.

AS9100 is an aerospace standard based on the ISO 9001 quality system requirements. The standard takes the requirements of ISO 9001 and supplements them with additional quality system requirements, which are established by the aerospace industry in order to satisfy DOD, NASA and FAA quality requirements. The intent of the standard is to establish a single quality management system for use within the aerospace industry.

“It’s hard to express the pride I feel when STI achieves major accomplishments such as this,” said David Raby, President/CEO. “It is another indication of our commitment to building the highest quality products for our customers. I’m also especially proud of the STI personnel that successfully led us through the process of receiving this certification.”

About STI Electronics, Inc.

Since 1982, STI Electronics, Inc. (STI) has been the premier full-service organization for training, consulting, laboratory analysis, prototyping, and small-to-medium volume contract PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. For more information, click here.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.