Conecsus to Exhibit at SMTA Tijuana Expo and Tech Forum


Reading time ( words)

Conecsus, LLC will exhibit at the SMTA Tijuana Expo and Tech Forum, Tijuana Edition, on August 1, 2019, at the Grand Hotel Tijuana BC, Mexico. Conecsus representatives Roberto G. Valenzuela Camargo and Yessica Romero will illustrate how the company processes wastes containing primarily Tin, Tin-Zinc, Lead, Silver, Gold, and Copper, and converts them into usable metal products, paying its customers back for their metals waste. Conecsus is an ISO 14001 EMS certified recycling company and a refiner of SMT solder/solder paste wastes and residues. The Conecsus exhibit will be located at table no. 1.

In making the announcement, Yessica Romero, Senior Business Manager for Conecsus in Mexico, stated, “Our customized programs, dealing with everything from solder dross to contaminated consumables, are not only ‘green’ and help our Mexico customers manage their metals waste, but also put money back into their pockets that would otherwise have been lost.” She added, “With our patented, advanced recycling technologies, Conecsus keeps our customers compliant with local, state, and federal regulations while decreasing their carbon footprint and reportable waste streams.”

About Conecsus

Founded in 1980, Conecsus, LLC is a sophisticated ‘green’ recycler and refiner of SMT solder/solder paste wastes and residues, as well as Tin, Tin-Zinc, Lead, Silver, Gold, and Copper from a variety of manufacturing industries. Located in Terrell, Texas, USA, Conecsus converts these wastes into usable metal products. Conecsus’ mission is to provide innovative and high-quality industrial byproducts management, metal recovery, and recycling options that provide world-class value and service to our customers, and display respect and stewardship toward the environment. For more information, visit www.conecsusllc.com.

Share

Print


Suggested Items

Approaches to Overcome Nodules and Scratches on Wire-Bondable Plating on PCBs

07/17/2019 | Young K. Song and Vanja Bukva, Teledyne Dalsa Inc., and Ryan Wong, FTG Circuits
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. This paper details if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)

07/16/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.



Copyright © 2019 I-Connect007. All rights reserved.