-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Geek-A- Palooza: Get Your Geek On in Minnesota!
October 11, 2016 | Barry Matties, Publisher, I-Connect007Estimated reading time: 5 minutes

If you haven’t been to Geek-A-Palooza yet, you may just get a chance, because the social networking event could be coming to your city in the near future. I met with founder Tara Dunn following the most recent Boston event, to learn more about Geek-A-Palooza and why the laid back atmosphere is beneficial for both the sponsors and the attendees.
Barry Matties: Let's just start with some context about what Geek-A-Palooza is.
Tara Dunn: Geek-A-Palooza is a social networking event for the electronics industry, with the intention of pulling together all aspects of the industry into one location. So everybody can talk, get to know each other, and interact face to face instead of behind our computers, as we normally do.
Matties: How long have you been doing this?
Dunn: This will be our fourth year.
Matties: And this was the first year you've been in multiple cities—you've always been up in Minneapolis. I was just at your Boston event. How did it go from your perspective?
Dunn: We were co-located with EDI CON in Boston, and I thought it went really well. For our first event there we had about 150 attendees, and I think that's great. Everybody had a good time and it was a good complement to the end of a trade show—to come together and have a little bit of entertainment and some socialization.
Matties: Aside from the socializing, it's also a business event. People want to come to conduct business. We know that networking and socializing is part of that, but what are the exhibitors and sponsors talking about?
Dunn: What the sponsors like is that in a very short period of time they have the ability to talk to many different customers or potential customers in a relaxed environment. Instead of going out and making 10 customer calls, you're actually talking to those same ten people within an hour, but you're also doing it in a more personalized way. Instead of being in a conference room you're at a social event, or a party if you will.
Matties: One thing I noticed about the event is that it is three hours long. Do your sponsors think that's long enough? The reason I ask that is, if I'm at a social, relaxed event and I'm trying to talk to ten people in three hours, that’s compressing a lot into a short span. You're drinking, you're a little more relaxed, and playing some of the games. Are you looking at maybe extending the hours in the future?
Dunn: Yes, we continue to keep trying to experiment with that and improve on the event. We have done it for three hours and we have done it for four hours.
Matties: I thought perhaps the sponsors would maybe want more time, because you're right, once the room got busy and the games were being played, there was a lot to see because you had something like 20 tabletop sponsors, which is fantastic. In terms of repeat sponsors, you've had sponsors from the first event still sponsoring?
Dunn: We have several, yes, and some of those that started with us on day one expanded with us. We went out to California earlier this year and to Boston, and they're still with us.
Matties: Well that's the testament of quality of what's going on at the event. What's nice is that it's not your typical event—it's something that feels different and it’s positioned differently. What are the expectations of the visitors?
Dunn: As an attendee, a lot of the feedback that we've gotten is similar to what I've just described with the sponsors, but from the other side. They can see several of their suppliers in one location, instead of having to set up different meetings with everybody. They get to meet new people as well and see what's new in the market and what some of those sponsors have for new technology or new programs that they might not have heard about yet.
Matties: I know in talking to some of the sponsors in Boston that they were quite happy. Sales were made. Connections were made. From your point of view, what's the greatest challenge of putting on an event like this?
Dunn: The greatest challenge is spreading the word out to potential attendees. There are just so many people to reach in the electronics industry; how do you get that information in front of them?
Matties: When people first hear about Geek-A-Palooza, why do they show up the first time?
Dunn: When people see the name, Geek-A-Palooza, it stops them. You're scrolling through an e-mail and you see an e-mail blast that's inviting you to Geek-A-Palooza. You say, “What is that?” Then when you open it up, we really try to convey the message of having fun while you're doing business.
Matties: On the fun side, I know you have several activities, games and such. You also have a bar for the pub crawl. What else?
Dunn: We always have cocktails available. We have food and higher-end hors d’oeurves that we pass around. Then we play games, and we have experimented with a lot of different games. The most popular game is the ring toss, and I'm sure it will continue to be. We have done trivia, and we have had a very competitive basketball game where players shoot at the hoop on a timer. Anything that seems to have a little element of competition to it but is not too complicated seems to be fun.
Matties: When and where is the next event?
Dunn: Our next event is back in Minneapolis on Thursday, October 13. It’s a standalone event and it begins at 4:00 pm. It will be our last event of 2016. In the coming weeks we’ll be finalizing the scheduling for next year’s events.
Matties: How do you choose the event locations?
Dunn: Some of it is interest from the event area, suggested by people who want to champion the event and help us bring it to their city. We also just look at growing areas for the electronics industry.
Matties: Well, it looks like a successful event. I think once someone experiences it and they understand it, it's really a lot fun. I enjoyed it. Boston was my second one I’ve attended. I went to the Irvine event last spring, which was your first one in California.
Dunn: It was, and it was our first event outside Minneapolis.
Matties: Thank you so much, Tara, and we're looking forward to seeing you at the next event.
Suggested Items
Global Semiconductor Sales Increase 18.8% in Q1 2025 Compared to Q1 2024; March 2025 Sales up 1.8% MoM
05/06/2025 | SIAThe Semiconductor Industry Association (SIA) announced global semiconductor sales were $167.7 billion for the first quarter of 2025, an increase of 18.8% compared to the first quarter of 2024 but 2.8% less than the fourth quarter of 2024.
Commerce Secretary Howard Lutnick Visits TSMC Arizona Fabrication Facility for Third Fab Ground Breaking
05/02/2025 | U.S. Department of CommerceU.S. Secretary of Commerce Howard Lutnick visited the Taiwan Semiconductor Manufacturing Company (TSMC) semiconductor fabrication facility in Phoenix, Arizona where the company broke ground on a third fab facility.
Rogers Reports Q1 2025 Results
04/30/2025 | Rogers CorporationNet sales of $190.5 million decreased 0.9% versus the prior quarter. Advanced Electronics Solutions (AES) net sales increased by 1.8% primarily related to higher ADAS and aerospace and defense sales, partially offset by lower EV/HEV and industrial sales. Elastomeric Material Solutions (EMS) net sales decreased by 4.3% primarily from a seasonal decline in portable electronics sales and lower EV/HEV sales, partially offset by higher general industrial sales.
Cicor’s Shareholders Approve All Proposals
04/18/2025 | CicorThe Annual General Meeting approved the 2024 annual report, the annual financial statements, the consolidated financial statements, the report on non-financial matters and the appropriation of available earnings.
Würth Elektronik ICS at PCIM Europe 2025
04/14/2025 | Wurth ElektronikWürth Elektronik ICS will be exhibiting at PCIM in Nuremberg from 6 to 8 May 2025. The specialist for PCB connection solutions in the high-current sector and inventor of Powerelements will be focussing on power electronics at exhibition stand 337 in hall A6.