-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInventing the Future with SEL
Two years after launching its state-of-the-art PCB facility, SEL shares lessons in vision, execution, and innovation, plus insights from industry icons and technology leaders shaping the future of PCB fabrication.
Sales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
The Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Patty’s Perspective: Everything Old is New Again
January 19, 2017 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes

Happy New Year to all of you faithful and new readers out there! I hope you are looking forward to 2017 as much as we are here at I-Connect007. We have exciting plans for this year and can’t wait to get started, but first we need to talk about this month’s topic.
This month’s issue is all about plating and surface finishes; long ago, that was pretty much my start in the world of printed circuits—wet processing. So this is kind of my home turf—and not, since I haven’t worked in wet processing for some…well, for many years. I’ve always expected that I could hop right back onto the plating room floor and pick right up where I left off all those years ago. Or could I? Have things changed much? Time to read on and see.
So what is new in plating and surface finishes? Well it’s true that there are still the basic processes—cleaners and microetches, copper and nickel and gold electroplating, immersion tin, nickel, silver—all of which have been around for quite a long time. But with the finer features, the far greater reliability concerns, the lead-free solders, the constant need for lower cost and greater efficiency, etc., the spotlight is often on these “old” processes. Plus, there are a few new ones like ENIPIG.
Much research and development has gone into refining additives for electroplating and electroless/immersion baths to improve the plating quality in one way or another, both on surfaces and in through-holes and vias. Following on that is a tremendous amount of testing to prove out said processes and the subsequent assembly-ability of components. In the end, it’s all about reliability, reliability, and reliability.
There are a plethora of final finishes to choose from today. How does one decide? Well, that takes us right to the line-up for this month. Regular columnist Tara Dunn of Omni PCB has chosen that very subject so it seems appropriate to start with her column on how to choose a final surface finish.
Following this is a study of immersion gold processes—some of that R&D work I mentioned earlier. Don Gudeczauskas, et al, of Uyemura International, present a fine research paper on a comparative study of three immersion gold processes, looking at both solderability and wire bondability.
Lest anyone think that wet processes have no effect on electrical test, Gardien Services’ Todd Kolmodin is here to set the record straight with a look at the challenges that plating and surface finishes present to electrical test.
RBP Chemical Technology’s Michael Carano is Mr. Plating himself, and he gives us a detailed look at some of those things you might tend to overlook or perhaps take for granted in your acid copper plating process. Rather than talk about controlling the typical constituents, Mike looks beyond at tank parameters and the surrounding process steps.
We are fortunate to have another R&D article, this one by Ron Blake, et al, of MacDermid Enthone Electronics Solutions. They get into another relatively new area for copper electroplating, the filling of through-holes with copper.
Next, our own Pete Starkey reports on a MACFEST development project on a “univer sal surface finish,” namely ENIPIG (electroless nickel/immersion palladium/immersion gold).
This detailed report—including ample test data—has also been recorded as a webinar and can be viewed by clicking on the link near the end of the article.
In keeping with our policy of having a few general interest items for those chemistryphobes out there, we have no less than three columnists weighing in on the U.S. presidential election—in vastly different ways. IPC President John Mitchell starts with a discussion on how the Trump presidency and potential policy shifts may affect the electronics industry. He is followed by guest columnist John Hasselmann, IPC’s VP of Government Relations, with a discussion on corporate tax policy and possible changes that may come about with the new administration in Washington, DC.
Regular columnist Barry Lee Cohen compares the “fake news” from this past presidential campaign to the potentially false news that can and probably does occur within and about your own company. Barry also provides some concrete advice on how to keep the communication lines open so news and other information can be quickly disseminated—and any false “news” can be immediately combatted.
IPC APEX EXPO 2017 happens next month (see our calendar of events) and what better time to have our magazine focus on new technology—our topic for February. We expect there to be plenty for you to read about. You can subscribe now and have The PCB Magazine delivered to your inbox every month, giving you a head start on all things PCB.
Patricia Goldman is a 30+ year veteran of the PCB industry, with experience in a variety of areas, including R&D of imaging technologies, wet process engineering, and sales and marketing of PWB chemistry. Active with IPC since 1981, Goldman has chaired numerous committees and served as TAEC chairman, and is also the co-author of numerous technical papers. To contact Goldman, click here.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
How Good Design Enables Sustainable PCBs
08/21/2025 | Gerry Partida, Summit InterconnectSustainability has become a key focus for PCB companies seeking to reduce waste, conserve energy, and optimize resources. While many discussions on sustainability center around materials or energy-efficient processes, PCB design is an often overlooked factor that lies at the heart of manufacturing. Good design practices, especially those based on established IPC standards, play a central role in enabling sustainable PCB production. By ensuring designs are manufacturable and reliable, engineers can significantly reduce the environmental impact of their products.
50% Copper Tariffs, 100% Chip Uncertainty, and a Truce
08/19/2025 | Andy Shaughnessy, I-Connect007If you’re like me, tariffs were not on your radar screen until a few months ago, but now political rhetoric has turned to presidential action. Tariffs are front-page news with major developments coming directly from the Oval Office. These are not typical times. President Donald Trump campaigned on tariff reform, and he’s now busy revamping America’s tariff policy.
Global PCB Connections: Understanding the General Fabrication Process—A Designer’s Hidden Advantage
08/14/2025 | Markus Voeltz -- Column: Global PCB ConnectionsDesigners don’t need to become fabricators, but understanding the basics of PCB fabrication can save you time, money, and frustration. The more you understand what’s happening on the shop floor, the better you’ll be able to prevent downstream issues. As you move into more advanced designs like HDI, flex circuits, stacked vias, and embedded components, this foundational knowledge becomes even more critical. Remember: the fabricator is your partner.
MKS’ Atotech to Participate in IPCA Electronics Expo 2025
08/11/2025 | AtotechMKS Inc., a global provider of enabling technologies that transform our world, announced that its strategic brands ESI® (laser systems) and Atotech® (process chemicals, equipment, software, and services) will showcase their latest range of leading manufacturing solutions for printed circuit board (PCB) and package substrate manufacturing at the upcoming 17th IPCA Show to be held at Pragati Maidan, New Delhi from August 21-23, 2025.
MKS Showcases Next-generation PCB Manufacturing Solutions at the Thailand Electronics Circuit Asia 2025
08/06/2025 | MKS Instruments, Inc.MKS Inc, a global provider of enabling technologies that transform our world, today announced its participation in Thailand Electronics Circuit Asia 2025 (THECA 2025), taking place August 20–22 at BITEC in Bangkok.