-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
AT&S Reports Increase in Revenue in Q1-Q3 2018/19
February 4, 2019 | AT&SEstimated reading time: 3 minutes
In comparison with the same period of the previous year, AT&S increased revenue and significantly improved earnings. “After a very positive first half-year, the demand for mobile devices declined towards the end of the third quarter. Thanks to the broad product, technology and customer portfolio, we were nevertheless able to match the exceptionally high level of the previous year,” AT&S CEO Andreas Gerstenmayer commented on the current development.
Accumulated revenue rose by 3.2% from €765.9 million to €790.1 million. Sales increases for IC substrates and in the medical and healthcare segment partially offset the decline in demand recorded in the Mobile Devices, Automotive and Industrial segments in the third quarter. Exchange rate effects, especially the weaker US dollar, had a negative impact on the revenue development. Positive effects resulted from the application of the new accounting standard (IFRS 15).
EBITDA increased by 15.9% from €190.3 million to €220.5 million. The increase primarily results from efficiency and productivity improvements, the absence of the start-up costs incurred in Chongqing in the previous year and a favourable product mix. This result was supported by positive currency effects. The EBITDA margin amounted to 27.9% in the first nine months, an increase of 3.1 percentage points compared to the previous year level of 24.8%.
EBIT improved from €88.8 million to €121.5 million. The EBIT margin amounted to 15.4% (previous year: 11.6%).
Finance costs – net improved significantly from €-11.3 million to €-2.6 million. Although gross debt was substantially higher than in the previous year, gross interest expenses, at €9.6 million, were lower than the prior-year level of €10.8 million due to optimisation measures carried out subsequent to the hybrid bond. Interest income of €3.1 million exceeded the prior-year level of €0.7 million. This increase resulted primarily from the improved interest environment in the USD area. Exchange rate effects had a positive impact of €6.5 million on finance costs (previous year: income of €2.0 million).
Statement of Financial Position and Cash Flow
Based on this increase in equity and the higher total assets resulting from the issue of the promissory note loan, the equity ratio, at 42.9%, was 3.6 percentage points lower compared to 31 March 2018. Net debt declined by 34.7% from €209.2 million to €136.7 million. Cash flow from operating activities amounted to €153.2 million in the first nine months of the financial year 2018/19 (previous year: €121.0 million).
Mobile Devices & Substrates Segment Increases Profitability
Although the positive business development continued, the demand for mobile devices started to weaken in the third quarter of 2018/19. The segment benefited primarily from a higher-value product portfolio of IC substrates. Accordingly, the segment’s revenue increased by 3.7% from €580.0 million to €601.5 million. Exchange rate effects had a negative impact of €10.8 million on the reported revenue.
EBITDA improved by 14.1% from €155.3 million to €177.2 million. The significant increase in earnings primarily resulted from the successfully implemented efficiency and productivity improvement measures and the absence of start-up costs in Chongqing. This effect was supported by a higher-value product portfolio of IC substrates and positive currency effects. Overall, the segment recorded an EBITDA margin of 29.5%, which significantly exceeded the comparative value of 26.8% in the prior-year period.
Automotive, Industrial, Medical Segment at the Level of the Previous Year
The segment’s revenue, at €270.6 million, was at the level of the previous year. Strong demand was recorded in the Medical & Healthcare sector in the first nine months, while demand in the other two sectors was slightly weaker.
The segment’s EBITDA, at €38.3 million, exceeded the prior-year figure of €32.3 million by €6.0 million. The contribution to earnings from a better product mix and positive currency effects compensated for a decline in volume.
Outlook for the Financial Year 2018/19
Based on the current market development, especially the current weakness in demand in the Mobile Devices and Automotive segments, the Management Board now expects revenue growth of around 3% for the financial year 2018/19 (previously 6 to 8%). The Management Board confirms an EBITDA margin of 24 to 26%, which is supported primarily by efficiency and productivity improvement measures and a higher-value product portfolio of IC substrates.
Based on investments for the second expansion phase at plant 1 in Chongqing leading to cash outflows at a later time, total investments will amount to roughly €100 to 120 million for the financial year 2018/19 (previously roughly €140 to 160 million), with maintenance investments still expected at the planned level.
Suggested Items
Global NEV Sales Top 4 Million in 1Q25; BYD Remains Dual Leader, Xiaomi Enters Top 10 in BEV Segment
05/21/2025 | TrendForceTrendForce’s latest reports reveal that global NEV sales—including BEVs, PHEVs, and FCEVs—reached 4.02 million units in the first quarter of 2025, marking a 39% YoY increase. NEVs accounted for 18.4% of total global auto sales for the quarter.
Geospace Unveils New Brand Identity Reflecting the Company’s Move into Diverse Markets
05/20/2025 | BUSINESS WIREGeospace Technologies Corporation announces a new brand identity, reflecting the company's transformation of its leadership and culture along with a redefined strategy focused on applied intelligent technology.
Eltek Reports 2025 Q1 Financial Results; Revenue Up 8%
05/20/2025 | PRNewswireEltek Ltd., a global manufacturer and supplier of technologically advanced solutions in the field of printed circuit boards (PCBs), announced its financial results for the quarter ended March 31, 2025.
MKS Instruments Reports Q1 2025 Financial Results
05/16/2025 | Globe NewswireMKS Instruments, Inc., a global provider of enabling technologies that transform our world, today reported first quarter 2025 financial results.
Zhen Ding Reported Its 1Q25 Results, with Revenue Hitting a Record High for the Same Period
05/16/2025 | Zhen Ding TechnologyZhen Ding Technology Holding Limited a global leading PCB manufacturer, today announced its consolidated financial results for the first quarter of 2025.