-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
IPC Releases PCB Industry Results for January 2019
March 1, 2019 | IPCEstimated reading time: 3 minutes
IPC — Association Connecting Electronics Industries announced today the January 2019 findings from its North American Printed Circuit Board (PCB) Statistical Program. Sales and orders both dropped sharply in January, but the book-to-bill ratio strengthened to 1.06.
Total North American PCB shipments in January 2019 were down 21.4% compared to the same month last year. Compared to the preceding month, January shipments decreased 12.3%.
PCB bookings in January fell 24.4% year-over-year. Bookings in January were down 10.7% from the previous month.
“While PCB sales and orders typically fall in January compared to the preceding month, the unusually sharp year-over-year decreases in January’s sales and orders probably reflect a market correction,” said Sharon Starr, IPC’s director of market research. “The growth cycle that began in mid-2017 peaked in late 2017 and early 2018. Growth has been slowing since the middle of 2018. Current year-over-year growth rates reflect a comparison with peak levels of sales and orders a year ago. The steady decline in the book-to-bill ratio from a 12-year high in January and February of 2018 down to 1.01 in November indicated slowing growth, but the ratio rebounded and remains positive because orders continue to outpace sales. This indicates that positive sales growth is likely to resume by mid-2019.”
Detailed Data Available
The fourth-quarter 2018 edition of IPC’s North American PCB Market Report, containing detailed data from IPC’s PCB Statistical Program, was just published today. The first-quarter 2019 edition will be available by mid-May. The quarterly report presents detailed findings on rigid PCB and flexible circuit sales and orders, including separate rigid and flex book-to-bill ratios, growth trends by product types and company size tiers, demand for prototypes, sales growth to military and medical markets, and other timely data. This report is available free to current participants in IPC’s PCB Statistical Program and by subscription to others.
Interpreting the Data
The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next three to twelve months. A ratio of less than 1.00 indicates the reverse.
Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they reflect seasonal effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month might not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in both bookings and shipments to understand what is driving changes in the book-to-bill ratio.
IPC’s monthly PCB industry statistics are based on data provided by a representative sample of both rigid PCB and flexible circuit manufacturers selling in the USA and Canada. IPC publishes the PCB book-to-bill ratio at the end of each month. Statistics for the current month are normally available in the last week of the following month.
About IPC
IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 5,000-member company sites which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, Ga.; Stockholm, Sweden; Brussels, Belgium; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.
Suggested Items
KLA Invests in Operations in Wales with the Opening of a $138 Million R&D and Manufacturing Facility
05/23/2025 | PRNewswireKLA Corporation, a global leader in semiconductor process control and process-enabling technology, announced the opening of its new $138 million research and development (R&D) and manufacturing center in Newport, Wales, U.K., continuing the company's history of regional investment. SPTS, KLA's Wales-based product division, has been leading semiconductor equipment innovation in Wales since 1984, winning multiple Queen's Awards for excellence in R&D and export, and attracting strong technical talent to the region.
Explore TRI’s Test and Inspection Solutions at SMTA Ontario Expo 2025
05/23/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, will join the SMTA Ontario Expo 2025.
TRUMPF Electronics Announces the Opening of a Technical Center in Southeast Asia
05/22/2025 | TRUMPF ElectronicsTRUMPF Electronics, one of world’s leading plasma power suppliers for the semiconductor sector, marked its entry into the Southeast Asian market with a debut at SEMICON SEA 2025, alongside its new regional technical center in Malaysia.
SEMI, Purdue University Launch AI and Data Analysis Online Courses
05/22/2025 | SEMISEMI, the industry association serving the global semiconductor and electronics design and manufacturing supply chain, today announced it has partnered with Purdue University to launch an online course series focused on artificial intelligence (AI) and data analysis techniques for the semiconductor industry.
SEMICON Southeast Asia 2025 Mega Show Opens in Singapore with Top Global C-suite Executives at Inaugural CEO Summit
05/21/2025 | SEMISEMICON Southeast Asia (SEA) 2025, the region’s flagship global electronics manufacturing and semiconductor supply chain event, officially opened today at the Sands Expo and Convention Centre, Marina Bay Sands, Singapore.