Raytheon's Enterprise Air Surveillance Radar to Begin Live Testing at Wallops Island Test Facility
March 21, 2019 | Raytheon CompanyEstimated reading time: 2 minutes

Raytheon Company's Enterprise Air Surveillance Radar just took a 12-hour trip down the Eastern Seaboard. EASR, the newest sensor in the U.S. Navy's SPY-6 family of radars, recently completed subsystem testing at Raytheon's Near Field Range in Sudbury, Massachusetts. The 6' x 6' rotating array was wrapped, loaded onto a flatbed truck and eventually crane-lifted onto a 100 foot test tower at the Surface Combat Systems Center at Wallops Island, Virginia. Once up and running, the radar will undergo system-level testing, tracking a variety of aircraft through the end of 2019.
The Enterprise Air Surveillance Radar, or EASR, is the U.S. Navy’s next generation radar for aircraft carriers and amphibious warfare ships, providing simultaneous anti-air and anti-surface warfare, electronic protection and air traffic control capabilities.
EASR is the Navy's next generation radar for aircraft carriers and amphibious warfare ships that provides simultaneous anti-air and anti-surface warfare, electronic protection and air traffic control capabilities.
"Going from 'cold steel' to a fully calibrated radar in less than one year is no small feat, but that's exactly what we accomplished with EASR," said U.S. Navy Captain Jason Hall, Program Manager for Above Water Sensors, Program Executive Office Integrated Warfare Systems. "The scalable building block architecture developed for AN/SPY-6(V)1 enabled EASR to rapidly complete subsystem testing. We are making great strides toward delivering SPY-6 capability across the fleet."
Raytheon is building two variants of EASR: a single-face rotating array designated AN/SPY-6(V)2 for amphibious assault ships and Nimitz class carriers, and a three fixed-face array designated AN/SPY-6(V)3 for Ford class aircraft carriers and the future FFG(X) guided missile frigates.
Both versions of EASR are built on scalable Radar Modular Assembly technology as well as a software baseline that has been matured through development and recent test successes of AN/SPY-6(V)1 the U.S. Navy's program of record for the DDG 51 Flight III destroyers. Each RMA is a self-contained radar in a 2' x 2' x 2' box. These individual radars can integrate together to form arrays of various sizes to address any mission on any ship. EASR also adds air traffic control and weather capabilities to the mature SPY-6 software baseline.
Upon completion of system-level testing in Q4 2019, EASR will shift from the engineering and manufacturing development phase to the production phase. The 1st delivery of AN/SPY-6(V)2 to LHA-8, the America Class Amphibious Assault Ship, is on plan for 2021.
About Raytheon
Raytheon Company, with 2018 sales of $27 billion and 67,000 employees, is a technology and innovation leader specializing in defense, civil government and cybersecurity solutions. With a history of innovation spanning 97 years, Raytheon provides state-of-the-art electronics, mission systems integration, C5I® products and services, sensing, effects and mission support for customers in more than 80 countries. Raytheon is headquartered in Waltham, Massachusetts.
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
Bridging the Knowledge Gap in Test: A Conversation with Bert Horner
06/11/2025 | Barry Matties, I-Connect007Bert Horner is a seasoned industry veteran and co-creator of The Test Connection, Inc. (TTCI), a test and inspection company spanning over 45 years. In this candid conversation, Bert reflects on the challenges our industry faces with the retirement of career professionals and the subsequent loss of critical tribal knowledge. As he unveils The Training Connection’s innovative training initiatives, Bert emphasizes the importance of evolving educational programs that align with industry needs, particularly in design for test (DFT), and sheds light on strategies being implemented to foster the next generation of engineers.
IPC Hall of Fame Spotlight Series: Highlighting Bob Neves
06/11/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. This Hall of Fame spotlight features industry veteran Bob Neves, who joined IPC in 1986 and was inducted into the IPC Hall of Fame in 2007.
GEN3 Set to Host HATS²™ Technical Day at A.W. Technical Centre with Bob Neves
06/09/2025 | Gen3GEN3, a global leader in reliability testing and measurement solutions for the electronics industry, is excited to announce a dedicated HATS²™ Technical Day to be held at the A.W. Technical Centre in Farnborough, GEN3’s HQ. The event will showcase the HATS²™ (Highly Accelerated Thermal Shock) system with demos and presentations by Bob Neves, Chairman of RAS Inc. and creator of the HATS²™.
Rohde & Schwarz Satellite Industry Day 2025: Connecting the World with New Space and 5G NTN Technologies
05/27/2025 | Rohde & SchwarzAfter four successful online events with over 1000 participants, Rohde & Schwarz is hosting its fifth Satellite Industry Day on June 3, 2025, on-site at its Munich campus. Rohde & Schwarz test and measurement experts and partners from the industry will present topics from 5G Non-Terresterial Network (NTN) and satellite testing to monitoring and regulatory issues. During breaks participants can experience cutting-edge test and measurement solutions.