Artificial Throat Could Someday Help Mute People ‘Speak’
July 25, 2019 | ACSEstimated reading time: 1 minute

Most people take speech for granted, but it’s actually a complex process that involves both motions of the mouth and vibrations of folded tissues, called vocal cords, within the throat. If the vocal cords sustain injuries or other lesions, a person can lose the ability to speak. Now, researchers reporting in ACS Nano have developed a wearable artificial throat that, when attached to the neck like a temporary tattoo, can transform throat movements into sounds.
Scientists have developed detectors that measure movements on human skin, such as pulse or heartbeat. However, the devices typically can’t convert these motions into sounds. Recently, He Tian, Yi Yang, Tian-Ling Ren and colleagues developed a prototype artificial throat with both capabilities, but because the device needed to be taped to the skin, it wasn’t comfortable enough to wear for long periods of time. So the researchers wanted to develop a thinner, skin-like artificial throat that would adhere to the neck like a temporary tattoo.
To make their artificial throat, the researchers laser-scribed graphene on a thin sheet of polyvinyl alcohol film. The flexible device measured 0.6 by 1.2 inches, or about double the size of a person’s thumbnail. The researchers used water to attach the film to the skin over a volunteer’s throat and connected it with electrodes to a small armband that contained a circuit board, microcomputer, power amplifier and decoder. When the volunteer noiselessly imitated the throat motions of speech, the instrument converted these movements into emitted sounds, such as the words “OK” and “No.” The researchers say that, in the future, mute people could be trained to generate signals with their throats that the device would translate into speech.
Suggested Items
New TSN-MACsec IP Core for Secure Data Transmission in 5G/6G Communication Networks
04/15/2025 | FraunhoferReliability and security in broadband communication networks (5G/6G) are crucial for meeting the challenges of the digital future. Together with aconnic AG, Fraunhofer IPMS has developed an innovative IP core as part of the “RealSec5G” project, which combines the advantages of a MACsec IP core with those of a Time-Sensitive Networking (TSN) IP core.
AIM to Highlight Type 5 Solder and Other Leading Products at SMTA Capital Expo & Tech Forum
04/11/2025 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Capital Expo & Tech Forum taking place on May 8 at George Mason University – Mason Square in Arlington, Virginia.
NASA’s Advancements in Space Continue Generating Products on Earth
02/14/2025 | NASA JPLNASA’s Jet Propulsion Laboratory developed or collaborated on multiple technologies highlighted in the agency’s annual publication focused on commercial infusions.
Lockheed Martin to Modernize Air Force F-22 Raptor with Advanced Infrared Threat-Detection Sensors
01/22/2025 | Lockheed MartinLockheed Martin has received a $270 million contract from the U.S. Air Force to integrate a system of next-generation infrared defensive sensors on the F-22 Raptor.
NAMICS Brings Innovative Thermoset Materials to PCB Fabrication
01/16/2025 | Andy Shaughnessy, Design007 MagazineAt PCB Carolina, Matt Lake and Ken Araujo of NAMICS Technologies spoke with Andy Shaughnessy about the introduction of an innovative thermoset material to PCB fabrication. This groundbreaking material, originally developed for the semiconductor packaging industry, addresses a longstanding demand for unreinforced thermoset films that enhance dielectric properties in PCB applications and allow for manufacturing the very finest of features, 0.002" and below.