U.S. Army Invests in Additional Q-53 Radars and Capabilities
August 6, 2019 | Lockheed MartinEstimated reading time: 1 minute

The United States Army recently awarded Lockheed Martin three contracts to produce additional Q-53 systems and outfit the radar with enhanced capabilities, including extended range and counter unmanned aerial system (CUAS) surveillance. The flexible architecture of the Army's most modern radar allows for these upgrades, which support adaptable growth of the system to address aircraft, drone and other threats in the future.
"We realize the warfighter needs new and improved capabilities. The Q-53 represents a fast path to respond to current and emerging threats," said Rick Herodes, director of the Q-53 program at Lockheed Martin. "The flexibility of the architecture continues to allow the Q-53 to provide capabilities far beyond the original mission and allows for additional upgrades in the future."
Full Rate Production
The Army awarded Lockheed Martin a contract for a third lot of 15 Full Rate Production systems. Once this contract is delivered the Army will own 189 Q-53 systems. The Lot 3 systems will continue to be produced using gallium nitride (GaN) transmit-receive modules. This will provide the radar with additional power, reliability and the possibility for enhanced capabilities including extended range, counterfire target acquisition (CTA) and multi-mission, which delivers simultaneous CTA and air surveillance.
Surveillance
Lockheed Martin was also awarded a contract to enhance the Q-53's CUAS capability. This true multi-mission capability delivers simultaneous counterfire, CUAS and air surveillance.
Extended Range
Lockheed Martin was also awarded a contract by the Army that will extend the operating range of the Q-53 system by utilizing recent next-generation technology insertions already available in the radar.
About the Q-53
The primary mission of the Q-53 is to protect troops in combat by detecting, classifying, tracking and identifying the location of enemy indirect fire in either 90 or 360-degree modes. The Q-53 has protected warfighters around the world since 2010.
Lockheed Martin uses an open GaN foundry model, leveraging relationships with commercial suppliers that utilize the power of the expansive telecommunications market to provide military-grade GaN modules while taking advantage of commercial cost efficiencies.
About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.