Exponential Growth in Production Demand Sees Cardea Eyeing the Millionth Biosensor in 2023
August 17, 2022 | PRNewswireEstimated reading time: 2 minutes
Since its founding in late 2013, Cardea's scientists have been pioneering the development of the world's first mass produced biocompatible semiconductor - the BPU (Biosignal Processing Unit) - also called a graphene Field Effect Transistor (gFET) or graphene biosensor.
Brett Goldsmith, PhD, Chief Technology Officer at Cardea, states, "20 years ago we started seeing signs that carbon-based electronics were going to succeed at integrating biology and electronics where existing semiconductors had failed. However, at that time, no one had the technical understanding or experience necessary to create a scalable system concept. This is what we've done at Cardea in creating our BPU platform of wetware, nanoware, hardware, and software modules. It's because of that scalability that I'm immensely proud to say that this year we reached over half a million sensors produced in total and we believe we have the capacity to reach more than one million in 2023."
While the use of graphene in electronics has been in the experimental phase for years, it's only recently that scalable production has been achieved. An industry deep-dive from McKinsey estimates that graphene will become a $70B market in semiconductors by 2030.
IEEE Medal of Honor recipient and founder of numerous MEMS (Micro-ElectroMechanical System) semiconductor companies, as well as member of Cardea's Innovation Council, Dr. Kurt Petersen, states, "Cardea's visionary team has successfully incorporated the many years of knowhow from silicon semiconductor processing and applied this knowledge to graphene-based semiconductors. That may sound trivial, but it's absolutely not. Not only did they have to overcome the challenges to incorporate new materials and production concepts but think of the very basic idea: They're measuring the electronic signals from biology in liquids and salts on top of a semiconductor, which would almost instantly render any silicon-based chip useless. Cardea is - both in terms of production capacity and quality, as well as IP - the world's leading company in graphene biosensors. They have a significant capacity to revolutionize medical diagnostics sooner than most people think."
Kelly Huang, PhD, Chief Operating Officer at Cardea, adds, "We've made significant improvements in our production processes over the past year. In 2020 and earlier, our average monthly production was around 1,000 chips, increasing to 5,000 in 2021. This year we've demonstrated capacity for 20,000 BPUs each month and have projected to significantly increase our production capacity, next year. Moreover, we are now above a 90% yield for transferring graphene on to printed wafers. Also, when we do finished product testing as a last step in our quality control process, 95% of the electrical properties we measure are within 20% of the mean. That signifies a solid quality in the final product, which means the scientists that are using our BPUs are experiencing great reproducibility and consistency in their day-to-day measurements."
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.