AdValue Photonics Introduces 308 nm Single Frequency Fiber Laser
January 16, 2023 | PRNewswireEstimated reading time: 1 minute
AdValue Photonics, Inc., a leading manufacturer of innovative fiber lasers for materials processing, scientific, LIDAR, and medical markets, today announced that it delivered a single frequency 308 nm fiber-based, high-power ultraviolet (UV) laser to NASA Goddard Space Flight Center for applications in atmospheric measurements.
The 308 nm wavelength, or color of the laser light, is well-established in the medical, industrial, and scientific fields owing to the rapid absorption and precise effects associated with this wavelength. AdValue Photonics 308 nm single frequency laser is the first of its kind, all solid state version to emit 3 W average power with a diffraction limited beam. These features enable reliable, high-performance operation in atmospheric sensing systems as well as dermatology clinics and electronics factories around the world.
"The fiber-based 308 nm laser is an inflection point for real world laser applications, since previous technology required toxic chemical lasers to generate high power at this wavelength," said Dr. Michael Mielke, AdValue Photonics CEO. "The new laser design provides this highly effective form of light without the former challenges with safety, consumables, and high cost of ownership intrinsic with excimer lasers."
308 nm laser light is typically generated by xenon-chloride (XeCl) excimer lasers. While advances in excimer laser technology have improved their reliability over the last several decades, there remain substantial drawbacks owing to the constituent poisonous gases (halogens), high voltage supplies required for operation, and the high cost of ownership (gas consumption and component wear out). In contrast, the fiber laser architecture is all solid state (no gases) and operates with low voltages and high wall-plug efficiency.
AdValue Photonics is in development of higher power versions of the 308 nm laser in form factors specific to medical and remote sensing applications. The company recently showcased a 257 nm laser in the deep ultraviolet (DUV) spectrum using similar technology. AdValue Photonics' focused portfolio of fiber laser technology includes infrared, visible, and now UV lasers with peak performance beyond the traditional limits.
Suggested Items
Designing for Cost to Manufacture
11/21/2024 | Marcy LaRont, I-Connect007ICAPE's Richard Koensgen, a seasoned field application engineer with a rich background in PCB technology, shares his journey of working with customers and manufacturers through the intricacies of circuit board development and emphasizes the importance of early-stage collaboration with PCB designers. With a focus on tackling the most challenging aspects of PCB design and manufacturing, he discusses everything from layout considerations to the thermal challenges of today's technology when it comes to designing for cost.
OSI Systems Receives $11M Order for Electronic Assemblies
11/21/2024 | BUSINESS WIREOSI Systems, Inc announced that its Optoelectronics and Manufacturing division has received an order for approximately $11 million to provide critical electronic sub-assemblies for a leading-edge healthcare original equipment manufacturer (OEM), known for innovative and specialized medical solutions.
CHIPS for America Announces Up to $300M in Funding to Boost U.S. Semiconductor Packaging
11/21/2024 | U.S. Chamber of CommerceThe Biden-Harris Administration announced that the U.S. Department of Commerce (DOC) is entering negotiations to invest up to $300 million in advanced packaging research projects in Georgia, California, and Arizona to accelerate the development of cutting-edge technologies essential to the semiconductor industry.
NTT, Olympus Joint Demonstration Shows IOWN APN's Low-latency Capability
11/21/2024 | JCN NewswireNTT Corporation and Olympus Corporation announced that, following the start of their joint experiment in March of the world’s first cloud endoscope system which processes endoscopic videos on the cloud, they jointly established a cloud endoscopy system utilizing the IOWN APN technology.
Hon Hai Joins OpenUSD Alliance to Promote Standardized and Open Source Universal Scenario Description (USD) Technology
11/21/2024 | Hon Hai Technology GroupHon Hai Technology Group , the world’s largest technology manufacturing and service provider, announced that it has joined the Alliance for OpenUSD (AOUSD ) to support the construction of a 3D ecosystem and promote Cooperation among various industries around the world promotes the standardization of Universal Scene Description (USD ).