-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Marcy’s Musings: Productronica 2023 and Coming Home
November 20, 2023 | Marcy LaRont, PCB007 MagazineEstimated reading time: 4 minutes
Productronica has concluded and I have wrapped up my first two weeks back on the I-Connect007 team. I’m exhausted, and I am looking forward to bit of a “lie-in,” as they say around here. It’s time to be home.
It was a great week in Munich. The show had 42,000 visitors, all descending on 88,000 square meters of show space over eight sprawling halls, to see some 1,400 exhibitors, representing 45 countries worldwide and all parts of the PCB/SMT provider supply chain. It appears the show has regained pre-pandemic levels of engagement, and we congratulate them.
Our team walked over 30 miles on an unforgiving concrete floor from Tuesday to Friday. Our sore feet were counterbalanced by opportunities to see many colleagues and industry friends, some whom we will not see again until 2025. For me, I could not have been happier to be thrust immediately into the action, to see first-hand all that is being accomplished in our industry to make our factories and products better, stronger, and faster. Process/factory automation, artificial intelligence (AI), workforce shortage, the CHIPS Act, and the economy were recurring topics as we walked and talked our way through the halls at Messe Munchen. After some time away from the industry, I came into the show with relatively fresh eyes. Here are some things that stood out for me.
Robotic Arms Are Everywhere
If I have one visual take-away from this show, it is that of robotic arms—bright colors, large and small—all moving deliberately at their specific tasks, reducing scrap levels from human error, and filling some of that gap in the workforce. Most of the robotics were for handling boards, but there seemed to be arms for all manner of process applications, again highlighting the industry’s need for increasingly more plant automation (the overarching theme of the show, if there was one). Especially as we continue to grapple with a small to nonexistent skilled workforce in United States and Europe, plant automation, Smart plants and ultimately Plant 4.0 are the goals of most manufacturers.
Smart Plants
Consistent to this line of discussion, I saw a lot of cool machinery on display, but particularly enjoyed a demonstration of the Pluritec X-cut S1 which conducts the nine process steps between lamination and drilling in one machine, processing at a rate of approximately two minutes per panel, and all with total traceability through the QR code labeling system. Not only is each individual panel labeled and identifiable, but each individual core as well, with all data stored and easy to access. If an error occurs at this point in the process, the manufacturer will not see it until AOI, resulting in much scrap. Though still programmed by human techs, of course. The X-cut S1 significantly lessens the opportunity for human error within these nine stages of the bord manufacturing process. Lino Sousa told me, “It’s a no-brainer,” and reported an estimated ROI of two years.
AI, AI, and More AI
Everyone talks about it and almost everyone claims to be using it in some form, but this week, I learned the term “neural network.” (I personally like IBM’s definition.) Barry Matties and I visited the Delvitech booth, saw their AOI machines, and spoke with owner and founder Roberto Gotti, who states emphatically that they are not so much an AOI machine supplier as they are a technology solution supplier. Naming their line of AOI machines after Greek gods and with two new patented AOI cameras, it is actually their cloud-based AI software they talk about the most, promising that they are (for now), far ahead of the pack when it comes to machine self-learning. Case in point, his patented software and algorithms are something Gotti plans to apply far beyond the electronics industry. Be sure to watch for our interview with Roberto, and I’d love to hear your feedback on his thoughts about the future of AI.
Simple Brilliance
Who doesn’t love simple solutions to big problems? Alltemated’s product, in essence, is a small, sophisticated adhesive strip that allows a bad component to be replaced on a loaded board as opposed to an entire board being scrapped. The cost-saving potential is staggering.
Being the Machine/Virtual Reality
From the standpoint of sales and marketing, we saw some clever things as well. At the Rehm booth for instance, surrounding their high end VisonXP+ VAC reflow convection soldering system and the CondensoXC vapour phase soldering line was their clever and colorful “the art of” campaign featuring digital iterations of famous art while bringing the message fully back around to Rehm’s solutions. But beyond just good old visuals, they also provided booth visitors with 3D virtual reality glasses to experience their machines from the inside. Well done!
As someone coming back into the PCB industry after a break, I have relished each opportunity to see an old friend or bump into a name from the past. I’ve been pleasantly surprised and touched to be remembered by some. In the end, the time went quickly. As I board my plane back to the United States, it occurs to me that I am “coming home” in more ways than one.
Check out Real Time with... productronica for our complete coverage of productronica 2023.
Suggested Items
Star Wars and Disney: ‘Spinning the Script’ With Paul Bailey
05/13/2024 | I-Connect007 Editorial TeamPaul Bailey has quite a story to tell. The current vice president at AOA, and former principal concept technical director for Walt Disney Imagineering gave the opening keynote speech at IPC APEX EXPO 2024. He delved into some of the technological marvels he’s been involved with throughout his career, particularly with Star Wars: Galaxy’s Edge, the new Star Wars experience at Disneyland and Walt Disney World.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/10/2024 | Marcy LaRont, PCB007 MagazineSpring is a renewal each year as dormant flora bloom, and baby ducklings and geese are ever present in local bodies of water. Even though it is beginning to get hot, I love this time of year in Arizona, with the sun waking me around 5 a.m. It fills me with an energy that I often lose in the dark winter months. Wherever you find yourself in the world, I hope you are enjoying Spring and that you are filled with energy and enthusiasm for all the great work part of our daily lives in this industry.
Doug Bodenstab: What's Exciting at the Del Mar Electronic and Manufacturing Show
05/08/2024 | Barry Matties, I-Connect007The recent Del Mar Electronic & Manufacturing Show showcased the latest in technology in designing, manufacturing, and testing electronics. In this interview, show organizer Doug Bodenstab shares what makes this show successful and highlights the upcoming sister show that takes place in Anaheim later this year.
May Issue of SMT007 Magazine: Coming to Terms With AI
05/06/2024 | I-Connect007 Editorial TeamIn the May 2024 issue of SMT007 Magazine, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
It’s Only Common Sense: OCCAM—the Time Is Now
04/22/2024 | Dan Beaulieu -- Column: It's Only Common SenseOne of my favorite books is a little tome called Who Moved My Cheese? Even those of you who don’t spend a lot of time reading books have at least heard of it and know that it refers to people, especially in business, who are so stuck in their ways that they get upset when something changes. In our business, we know this kind of thinking is especially true. In fact, it always makes me laugh when one of my innovative friends finds a new way to do something and is afraid that someone will steal his idea. I always tell him that no one in our business, especially a PCB engineer, has ever thought about someone else’s innovative idea enough to steal it.