-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
AT&S Celebrates Official Opening at the New Campus in Malaysia
January 24, 2024 | AT&SEstimated reading time: 3 minutes
The new campus in Kulim, about 350 kilometres north of the Malaysian capital Kuala Lumpur, was completed in record time: In just over two years the new AT&S campus was built. “This huge success was made possible by our workers and employees in Kulim. This is your day and also a historic day for AT&S that is worthy of a celebration. I take great pride to bear witness to the achievement of this great milestone. Thank you”, commented AT&S CEO Andreas Gerstenmayer in his speech at the Opening Ceremony. “The quick progress was facilitated by close collaboration with Malaysian representatives and authorities on the national, regional and local level. The authorities in Malaysia, especially MIDA and the management of the Kulim High-Tech Park (KHTP) and Advantage Austria from the Austrian Federal Economic Chamber supported us a lot.”
The facilities in Kulim were built to the highest standards of quality and sustainability, with state-of-the-art machinery, recycling systems and a green energy concept. “With the opening of AT&S’s impressive production site, economic cooperation between Austria and Malaysia is reaching a historic high point”, said the Austrian Ambassador to Malaysia and Brunei, Andreas Launer. “I am confident that the company’s strong presence in Malaysia will give important impetus to our bilateral relations and will create many new opportunities to work closer together also in other fields such as higher education, vocational training or the development of new technologies. I hope that this investment will also put Austria in the spotlight of Malaysian companies as a great business location and tech partner in the heart of Europe.”
Advanced Microchips
Malaysia is fast becoming an international hub for the electronics and semiconductor industry, thanks to its excellent infrastructure and talent pool. “Our strategic decision in 2021 to choose Malaysia for our first facility in Southeast Asia was absolutely correct, so far we invested just over EUR 1 billion in our AT&S Campus in the Kulim High-Tech Park. We benefit from the excellent conditions here and Kedah as the technology hotspot in this region,” said AT&S Board Member and Executive Vice President for BU Microelectronics, Ingolf Schroeder. “With the AT&S investment in Malaysia, we are creating thousands of high-tech jobs in the region, till end of this year almost 2500. This will help to set up the framework for future growth in Malaysia”, says AT&S Board Member and Executive Vice President for BU Microelectronics, Ingolf Schroeder.
The AT&S Campus is a masterpiece of a successful technology company, although the technology market has been challenging in recent months. Analysts expect the recovery of the technology sector to resume in the middle of this year.
Today the office building and plant 1 were opened. In plant 1 AT&S will produce technology for the global semiconductor company AMD. Plant 2 is wind and water tight, as soon as the market environment for one of our main customers has improved we will bring the second plant online.
AT&S Malaysia will produce cutting-edge IC Substrates, which are an integral part of high-performance data processors for computers, datacentres and AI-infrastructure. “AT&S has steadfastly kept its commitment to us and punctually delivered a plant that fully meet AMD’s expectations. We are convinced that AT&S is a perfect additional source of high-quality IC Substrates for our data centres”, remarked Scott Aylor, Corporate Vice President for Manufacturing at AMD. Serial production in Kulim will commence later this year.
Suggested Items
'Air Sovereignty' for AT&S: Gold Status Underpins Highest Aerospace Competence in Leoben
06/19/2025 | AT&SThe systems that control modern aircraft are subject to the strictest requirements in the electronics industry. Suppliers to aviation companies must therefore have their production facilities and processes inspected annually by independent auditors as part of the National Aerospace and Defense Contractors Accreditation Program (Nadcap).
Leonardo DRS Awarded $41 Million Contract to Provide Combat Management System Hardware for U.S. and Allied Navies
06/11/2025 | BUSINESS WIRELeonardo DRS, Inc. announced that it has been awarded a $41 million contract from the Naval Sea Systems Command to continue delivering critical combat management system hardware for U.S. Navy surface combatants, allied naval forces, and the U.S. Coast Guard.
IPC Hall of Fame Spotlight Series: Highlighting Bob Neves
06/11/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. This Hall of Fame spotlight features industry veteran Bob Neves, who joined IPC in 1986 and was inducted into the IPC Hall of Fame in 2007.
Elementary, Mr. Watson: PCB Routing: The Art—and Science—of Connection
06/11/2025 | John Watson -- Column: Elementary, Mr. WatsonMany people who design circuit boards love the routing part of the design. This is partially because we want to stop looking at the annoying rat's nest of connections, which seem to have no rhyme or reason at first glance. We want to get to something more exciting. Routing is the ultimate part of solving the puzzle. You take all the messy lines from the schematic and turn them into neat, organized paths.
GEN3 Set to Host HATS²™ Technical Day at A.W. Technical Centre with Bob Neves
06/09/2025 | Gen3GEN3, a global leader in reliability testing and measurement solutions for the electronics industry, is excited to announce a dedicated HATS²™ Technical Day to be held at the A.W. Technical Centre in Farnborough, GEN3’s HQ. The event will showcase the HATS²™ (Highly Accelerated Thermal Shock) system with demos and presentations by Bob Neves, Chairman of RAS Inc. and creator of the HATS²™.