An IPC ‘Blockbuster’: IPC-7711/21
June 11, 2024 | Teresa Rowe, IPC Senior Director, Assembly and Standards TechnologyEstimated reading time: 1 minute

Dan Foster, Missile Defense Agency, has been instrumental in developing IPC-7711/21, Rework, Modification and Repair of Electronics Assemblies, over several revisions of this important guideline document. We talked to Dan and committee member Agnieszka Ozarowski, BAE Systems, about the most recent revision.
IPC-7711/21 is the replacement guideline for IPC-R-700C, a document last updated in 1989. In 1998, Dan led the first meeting for the creation of IPC 7711/21 and recalls why R-700 needed to be updated.
“We were using, like, two hair dryers to remove components by hot air at that time,” he says.
Technology had changed, and R-700 needed to be replaced. IPC-7711/21 is different from others in the IPC library. It is a guideline, not a standard, offering information on how to do rework and repair on boards and assemblies. IPC-7711/21D provides easier-to-follow guidelines, new visual aids, procedures, tools, methods, and materials for restoring electronic assemblies.
Each procedure has been reformatted to make it easier for the reader to understand, and the format is more in line with standards.
“The big thing about 7711/21 is that it has procedures, but they are flexible,” Dan says. “We wanted to give people core procedures to use, and those can be modified. People tend to treat it like a standard, and we need to remind them that it is not.”
The first thing he tells others is to read the front of the book. “Nobody wants to, but we changed procedures with a simple note up front, stating whether procedures will work for lead or lead-free,” Dan says. “But you need to understand the features—different fluxes and higher temps. We refer to all that in the front of the document. In revision D, you will see many changes to the General Information section of the document. Team Iron, the A-Team responsible for the content, worked to bring it up to date.”
To read the entire article, which appeared in the Spring 2024 issue of Community Magazine, click here.
Suggested Items
Collins Aerospace Approved to Begin Full Rate Production of MAPS Gen II system
03/13/2025 | Collins AerospaceCollins Aerospace, an RTX business, has received approval for Full Rate Production of the Mounted Assured Positioning, Navigation and Timing (PNT) Generation II system (MAPS GEN II).
Eltek Reports Full Year and Q4 2024 Financial Results
03/13/2025 | EltekEltek Ltd., a global manufacturer and supplier of technologically advanced solutions in the field of printed circuit boards (PCBs), today announced its financial results for the full year and fourth quarter ended December 31, 2024.
YINCAE: UF 158UL Redefines Underfill for Large Chips
03/12/2025 | YINCAEYINCAE, a leading innovator in advanced materials solutions, today announced the launch of its groundbreaking underfill material, UF 158UL. This cutting-edge product is designed to meet the increasing demands of large format chips, offering unparalleled performance in room temperature flow, fast cure, and high reliability.
MicroCraft to Unveil Three New Models at IPC APEX EXPO 2025
03/12/2025 | MicroCraftMicroCraft, a global leader in PCB testing and precision inkjet printing solutions, is set to showcase three cutting-edge models at IPC APEX EXPO 2025 at the Anaheim Convention Center March 18-20 in booth #4105. Each model represents the latest advancements in speed, accuracy, and automation across MicroCraft’s three product lines.
Pudu Robotics' PUDU T300 Achieves CE-MD and CE-RED Certifications
03/12/2025 | PRNewswirePudu Robotics, a global leader in service robotics sector, announced its innovative industrial delivery robot, the PUDU T300, has obtained both the CE-MD (Machinery Directive) and CE-RED (Radio Equipment Directive) certificates by TÜV SÜD, a world-renowned testing and certification organization.