Dan’s Biz Bookshelf: ‘The Wizard and the Warrior: Leading with Passion and Power’
Marcy’s Musings: Destination Metallization
It’s Only Common Sense: Motivate Your Team by Giving Them What They Crave
Würth Elektronik: Intelligent Power Supply and Charging Interface
October 16, 2024 | Wurth ElektronikEstimated reading time: 1 minute
Just in time for EU interface standardization, Würth Elektronik presents its new USB socket WR-COM USB 3.1 PD Type C – Power Only SMT. Used exclusively for power transmission, it supports the USB Power Delivery (USB-PD) communication protocol for adaptive charging up to 240 W.
By the end of 2024, the proliferation of charger types for small electronic devices will come to an end. The EU is making USB-C connectors and the USB Power Delivery standard mandatory across the board.
The new USB-C socket from Würth Elektronik, designed exclusively as a power supply and charging interface, meets the new standard. It communicates with the power supply and automatically determines the maximum charging power. In EPR (Extended Power Range) mode, up to 240 W flows into the batteries. Intelligent communication ensures particularly short charging times and prevents damage to circuits due to excessive currents.
Robust, easy-to-install design
For mechanically and electrically reliable installation, the six-pin socket is designed as a horizontal receptacle SMT component with six solder pins: four pins for power supply (Vbus and GND) and two for communication to determine the operating voltage (CC). The contacts come with a nickel barrier layer and a flash gold coating. A nickel coating provides the shielding plating (housing) with high corrosion protection. The thermostable LCP (Liquid Crystal Polymer) plastic parts used are suitable for the reflow soldering process. Moreover, the LCP is ideally suited for the high demands of mechanical durability required by the USB standard.
The intelligent USB socket is used wherever the USB interface is used only for power transmission, for example:
- Industrial PCs and laptops
- Displays
- Mobile input devices
- Handheld controllers
- Power banks
Share on:
Suggested Items
Cambridge GaN Devices Signs MoU with ITRI Covering GaN-based Power Supply Development
05/30/2024 | BUSINESS WIRECambridge GaN Devices (CGD), the fabless, clean-tech semiconductor company, dedicating to develop energy-efficient GaN-based power devices that make greener electronics possible, has signed a Memorandum of Understanding with Industrial Technology Research Institute (ITRI) of Taiwan to solidify a partnership in developing high performance GaN solutions for USB-PD adaptors.
Rogers Corporation Announces New Factory in Monterrey, Mexico
02/22/2024 | Rogers CorporationRogers Corporation announced that it has signed a lease on a factory in Monterrey, Mexico for advanced busbar manufacturing and engineering services.
Zuken Improves the Digital Twin Creation Process for Driving Smart Manufacturing
08/30/2022 | ZukenZuken announces the release of E3.series 2022, introducing enhancements to empower design teams to create digital twins with functional and manufacturing details captured in a single cutting-edge tool suite. The enhancements to E3.series 2022 cover all areas of electrical design through to the manufacturing process, including: wire routing, data visualization, design rule checks, change management and much more.
Rogers’ AES Group to Showcase curamik Ceramic Substrates & ROLINX Eco Busbars at PCIM 2022
04/14/2022 | Rogers CorporationRogers Corporation’s Advanced Electronics Solutions (AES) group will be exhibiting at PCIM Europe and showcasing the whole curamik ceramic substrate portfolio and ROLINX® Eco which is a new generation aluminum busbar with unique features.
Parade Technologies Completes Acquisition of Fresco Logic
06/04/2020 | Business WireParade Technologies, Ltd., a leading high-speed data transport IC supplier, announces the completion of its acquisition of Fresco Logic, Inc. for an aggregate purchase price of US$37.5 million in cash.