Dave Bergman: IPC’s Technology & International Reach
December 30, 2015 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
I met with the IPC’s VP of Standards and Technology, Dave Bergman, while in Chicago recently. I’ve known Dave for almost 30 years, so we had quite a chat, covering a lot of ground, from the efforts of IPC China and IPC India, to the standards activities that are certainly the core activity of IPC.
Patty Goldman: Dave, it is good to see you as always. How about we start with telling me a little bit about your job and what you are responsible for. I know everything morphs a little bit, as time goes by.
Dave Bergman: I am currently vice president of standards and training at IPC. As part of my activities, I retain some international responsibilities, including leading IPC’s India office, and European representatives in Sweden and Russia. I oversee all of our standardization efforts, our certification and training efforts, as well as validation services QML certification, the new SGA standards gap analysis program and multimedia training DVDs and online videos being developed for shop floor operators and technicians.
Goldman: Tell me more about your international responsibilities.
Bergman: From the international standpoint, I am responsible for the relationship between IPC and other global associations, many of which are in the World Electronics Circuits Council (WECC). These associations have a significant focus on the PCB industry in their regions and while this is still an important part of IPC activities, it is only a piece of the market we serve. WECC relations still help IPC in the area of market research, standards and government relations. I was formerly responsible for the China office. I got involved in IPC China when we started the office in 2002. I took over the management in 2007. IPC China activities grew enough to the point where IPC’s board said they wanted to have a full-time president responsible for China. When we hired a full-time president in 2012, I transitioned into other areas of responsibility and turned over the reins to Phil Carmichael.
Editor's Note: This article originally appeared in the December 2015 issue of The PCB Magazine.
Suggested Items
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.