Reconfigurable Chaos-based Microchips Offer Possible Solution to Moore’s Law
September 23, 2016 | NC State UniversityEstimated reading time: 2 minutes
Researchers at North Carolina State University have developed new, nonlinear, chaos-based integrated circuits that enable computer chips to perform multiple functions with fewer transistors. These integrated circuits can be manufactured with “off the shelf” fabrication processes and could lead to novel computer architectures that do more with less circuitry and fewer transistors.
Moore’s law states that the number of transistors on an integrated circuit will double every two years in order to keep up with processing demands. Previously this goal has been addressed by shrinking the size of individual transistors so that more could be added to the chip. However, that solution is quickly becoming untenable, and the semiconductor industry is looking for new ways to create better computer chips.
“We’re reaching the limits of physics in terms of transistor size, so we need a new way to enhance the performance of microprocessors,” says Behnam Kia, senior research scholar in physics at NC State and lead author of a paper describing the work. “We propose utilizing chaos theory – the system’s own nonlinearity – to enable transistor circuits to be programmed to perform different tasks. A very simple nonlinear transistor circuit contains very rich patterns. Different patterns that represent different functions coexist within the nonlinear dynamics of the system, and they are selectable. We utilize these dynamics-level behaviors to perform different processing tasks using the same circuit. As a result we can get more out of less.”
Kia and NC State colleague William Ditto, professor of physics and dean of the College of Sciences, worked on the conception, design, development and fabrication of an integrated circuit chip that contains working nonlinear circuits to perform multiple different digital computations.
Traditionally, transistor-based circuits perform one task each. Computer processors operate by routing each instruction and its operands to the appropriate transistor circuit on the integrated circuit that implements that specific instruction. In Kia’s design, the transistor circuit can be programmed to implement different instructions by morphing between different operations and functions.
“In current processors you don’t utilize all the circuitry on the processor all the time, which is wasteful,” Kia says. “Our design allows the circuit to be rapidly morphed and reconfigured to perform a desired digital function in each clock cycle. The heart of the design is an analog nonlinear circuit, but the interface is fully digital, enabling the circuit to operate as a fully morphable digital circuit that can be easily connected to the other digital systems.”
The researchers have produced an alternative approach for computing that is compatible with existing technology and utilizes the same fabrication process and CAD tools as existing computer chips, which could aid commercial adoption.
“We believe that this chip will help solve the challenges of demands for more processing power from fewer transistors,” Kia says. “The potential of 100 morphable nonlinear chaos-based circuits doing work equivalent to 100 thousand circuits, or of 100 million transistors doing work equivalent to three billion transistors holds promise for extending Moore’s law – not through doubling the number of transistors every two years but through increasing what transistors are capable of when combined in nonlinear and chaotic circuits.”
“We are nearing commercial size and power and ease of programming in our evolving designs that could well be of significant commercial relevance within a few months with our three month design/fabrication cycle of improvements and implementations,” Ditto says.
Suggested Items
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
American Standard Circuits to Exhibit at Focus on PCB 2024 Italy
05/09/2024 | American Standard CircuitsAmerican Standard Circuits will be exhibiting at this year’s Focus on PCB Italy 2024 to be held on May 15 and 16 at the Vicenza Expo Centre, Vicenza, Italy.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.
Real Time with…. IPC APEX EXPO 2024: Innovation and Collaboration at EPTAC
05/06/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and EPTAC Vice President Leo Lambert discuss the partnership between EPTAC and Blackfox, their program alignment, and future expansion plans. Leo introduces Burak Gokmen as the new "leader of the pack." The focus then shifts to Nano Dimensions' 3D printed circuit boards, emphasizing the need for proper documentation and training.