The Right Approach: FOD and the Aerospace Industry
October 4, 2016 | Steve Williams, The Right Approach Consulting LLCEstimated reading time: 1 minute

Introduction
Unless you are currently building aerospace product to AS9100[1] you are probably saying, “What the heck is FOD?” What started out as a requirement to prevent damage to aircraft parts such as engines has been flowed down to any component or assembly including PCBs.
What is FOD?
Foreign object debris/foreign object damage (FOD) is defined by Boeing[2] as, “A substance, debris or article alien to an aircraft or system, which would potentially cause damage.” Foreign object debris can lead to foreign object damage. The classic examples of FOD are things like a wrench or other hand tool left in a jet engine after maintenance has been performed. From a printed circuit board perspective, it means things that can become a permanent part of the product like dirt, dust or other debris that can be entrapped under soldermask or during lamination. It also means surface contamination that could be cleaned off but hasn’t been.
Why is FOD Important?
In an industrial environment, when a part doesn’t work the machine may go down. When something malfunctions in an automobile, the occupants have a high chance of survival. When something malfunctions in a plane, the plane goes down and people die. Aside from the human cost, an airplane is probably one of the most expensive pieces of equipment your product can go into. For example, it can cost more than $1 million to overhaul a McDonnell Douglas MD-80 engine after FOD, $10 million to replace it, with the cost of the entire airplane at around $50 million. A Boeing 747-8 costs in excess of $357 million!
FOD Area Levels FOD programs typically use a three-tier system of controls for activities with different titles in work areas. The system described in this document uses:
1. FOD Awareness Area
2. FOD Sensitive Area
3. FOD Critical Area
To read this entire article, which appeared in the September 2016 issue of The PCB Magazine, click here.
Suggested Items
Moog Announces Acquisition of COTSWORKS
07/07/2025 | BUSINESS WIREMoog Inc., a worldwide designer, manufacturer and systems integrator of high-performance precision motion and fluid controls and control systems, announced the acquisition of COTSWORKS Inc., an aerospace and defense fiber optics transceiver component manufacturer, for a purchase price of $63 million.
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.