Shipments of Mid-Size LCD TV Sets for 2016 Are Lower Than Initially Projected
October 5, 2016 | TrendForceEstimated reading time: 3 minutes
Soaring prices during the second half of 2016 and the planned closure of Samsung Display’s L7-1 fab have created anxieties about supply shortages in the LCD panel market, according to the latest analysis by WitsView, a division of TrendForce. Due to these factors, the share of 40- to 49-inch models in the combined LCD TV set shipments from the top 15 branded vendors for 2016 will be smaller than the projection made at the start of the year by 3.8 percentage points. Hence, the mainstream size bracket of LCD TV sets is unlikely to make the transition from the 32-inch to the 40- to 45-inch, or the mid-size segment.
Annual shipments of the 40- to 49-inch TV sets have been revised downward due to tight supply for panels
WitsView has revised the estimated shipments of LCD TV sets from the world’s top 15 branded vendors for 2016. Specifically, the share of 40- to 49-inch models in their combined annual shipments will be 3.8 percentage points lower than the year-start projection. The revised estimate also shows that the 40- to 49-inch will be the size bracket that experiences the most significant change in the annual shipment share.
With the supply of mid-size panels being constrained, branded TV makers are shifting their purchases towards either ends of the size range. The annual shipment share of TV sets belonging to the 30- to 39-inch and the 55- to 59-inch segments, for instance, will be 1.9 and 0.8 percentage points greater, respectively, than the year-start projections.
“South Korean TV brands initially planned to increase the share of mid-size models in their own shipments to at least 30% this year as to make the mid-size segment mainstream,” said Ricky Lin, research manager of WitsView. “However, LCD panel fabs in southern Taiwan were damaged by an earthquake in February. Furthermore, Samsung Display (SDC) encountered setbacks in implementing the Black Column Spacer (BCS) technology. Instead of expansion, South Korean brands saw their combined shipment share of the 40- to 49-inch models decreased by 5.4 percentage points in the third quarter compared with the beginning of the year.
“South Korean TV makers are nervous about the impact that the limited panel supply will have on their annual shipment targets,” Lin noted. “One of them has started to transport panels by air instead of by sea since the second quarter. All of them have adjusted their orders as well to purchase more panels below or above the mid-size range (e.g. panels sized 32 inches or 50 inches and above).
The 32-inch and the 55-inch saw shipment share growth
TV set shipments from China-based brands were also affected by the earthquake in southern Taiwan and SDC’s issues with the BCS technology. The share of 40- to 50-inch models in their combined shipments for 2016 will be 4.2 percentage points lower than the projection made at the start of the year, according to WitsView’s latest analysis. Conversely, the shares of the 32-inch and the 55-inch models in the combined shipments of Chinese brands will be 2.4 and 1 percentage points higher, respectively, than the year-start projections. The two largest Chinese LCD panel makers are the main suppliers of 32-inch and 55-inch panels, so their compatriot TV brands have taken advantage of the situation by expanding shipments for these two sizes as to achieve their annual targets.
“The six largest Chinese TV brands have been focusing on promoting their 55-inch products this year in order to meet the growing demand for UHD TV sets and maintain their competitiveness against the emerging Internet brands within the domestic market,” Lin pointed out.
WitsView believes the outlook of the LCD TV set market for 2017 is uncertain mainly because the limited supply of panels sized 40 to 45 inches will influence brands’ strategies regarding mainstream-size products. Also, prices of the 40- to 45-inch panels posted an increase of over 40% between the first and third quarters of 2016. Facing such massive cost pressure, second- and third-tier TV brands and OEMs may not be able to remain in profit during the second half of 2016, as prices of TV sets continue to fall.
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).
ROHM Develops Ultra-Compact CMOS Op Amp: Delivering Industry-Leading Ultra-Low Circuit Current
09/11/2025 | ROHMROHM’s ultra-compact CMOS Operational Amplifier (op amp) TLR1901GXZ achieves the industry’s lowest operating circuit current.