Patty’s Perspective: Take Me to Your Leader
October 26, 2016 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes
“You cannot lead where you do not go.” – Good Earth teabag, author unknown
We must have touched a real hot button when we decided to do this issue on leadership. When we sent out our survey on the topic, we received a lot of responses, which we’ll review in a separate article, plus many of our regular columnists were inspired to write on the subject.
So if you are looking to become a leader in your company or even a better manager, or even just a better person, this month’s issue is definitely for you. You have the opportunity to benefit from the wealth of experiences of our contributors, as nearly everyone offers up real life examples—and no two are the same.
Or if you are a tried and true techie with no such desire to “move on up,” read on anyhow— you will still learn plenty and not just about being a leader or manager. Our features contain plenty of opportunities to lead that do not involve your day job. Most, if not all, of this issue applies to every aspect of work and play (think teams and coaching), plus there are plenty of life lessons in here too.
We have quite the line-up for you, plus a few technical columns at the end to keep everyone happy. First, about that survey… I-Connect007’s Research Team presents and analyzes the results. It’s amazing the things you learn from open-ended questions. We throw in quite a few quotes from you, our readers, as you really do say it best.
Our first article is by Yash Sutariya of Saturn Electronics/Saturn Flex and he is writing on lessons in leadership he learned from his father Nagji, who recently passed away. It is both instructive and poignant—I just wish that in my earlier sales travels I had had the opportunity to get to Saturn and meet Nagji.
Next, Dave Dibble of Dibble Leaders discusses the results of the 10-question Biz Brain IQ survey that has been in our magazines for the past few months. The results, and Dave’s analysis, include the “correct” responses and how the scoring process. Missed it? Then check out the test page and take it before reading his article.
It’s not always easy for busy people to find time to author a column or article for us, even when you just know they are the right person for it. But IPC President John Mitchell was pleased to provide us with six totally practical lessons in leadership from his experiences in the electronics industry. Something to take to the bank, so to speak. And they are definitely for everyone. John is also going to be our newest columnist, so we can all look forward to more wisdom from him.
Next, I am very pleased to have our Brazilian columnist Renato Peres of Circuibras center his column around the 2016 Summer Olympics and lessons he learned about leadership from a few of the outstanding athletes. Como apropriado!
Regular columnist Todd Kolmodin of Gardien Services USA departed from his usual testing topics to write on the basic differences between leaders and managers. His perspective is interesting and thought-provoking.
Sam Sangani of PNC Inc. talks about the people element—your most valuable resource—of leadership. He explores three valuable aspects of good leadership centered on one’s employees. Next, Steve Williams of The Right Approach Consulting shares three personal experien ces that helped him transition from manager to leader. He alludes to more lessons learned, so perhaps we can tease some of those out of him over the next few months.
Happy Holden has contributed a column from his Essential Skills series, a 10-step business plan process for use by engineers or others wishing to present a new idea or product to management. Happy used the process himself during his tenure at HP.
And now to some good technical info to round out this issue. Mike Carano of RBP Technology discusses troubleshooting roughness or nodules found after copper electroplating. I hope you are all collecting Mike’s articles into a nice guide for your plating department.
Engineers, and I suppose others, feel a great need to solve problems, often on their own—it’s a sort of challenge to them. But in his column, Keith Sellers with NTS-Baltimore exhorts us to make use of the extensive knowledge already out there. In particular, he cites IPC conferences and meetings, as well as IPC’s Validation Services and the Defense Logistics Agency as sources of knowledgeable people.
We’re making it a tradition to wrap up each issue with marketing guru Barry Lee Cohen of Launch Communications. This month, BLC discusses trade shows as a part of your marketing plan. Very appropriate, as the season is almost upon us.
Next month it’s back to technical when we focus on all things vias. You think you know all about them? Think again! Don’t miss out— subscribe now and you will have it in your virtual mailbox the day it publishes.
Patricia Goldman is a 30+ year veteran of the PCB industry, with experience in a variety of areas, including R&D of imaging technologies, wet process engineering, and sales and marketing of PWB chemistry. Active with IPC since 1981, Goldman has chaired numerous committees and served as TAEC chairman, and is also the coauthor of numerous technical papers. To contact Goldman, click here.
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.