Squeezing Light to Cool Microscopic Drum Below Quantum Limit
January 12, 2017 | NISTEstimated reading time: 3 minutes

Physicists at the National Institute of Standards and Technology (NIST) have cooled a mechanical object to a temperature lower than previously thought possible, below the so-called “quantum limit.”
The new NIST theory and experiments, described in the Jan. 12, 2017, issue of Nature (link is external), showed that a microscopic mechanical drum—a vibrating aluminum membrane—could be cooled to less than one-fifth of a single quantum, or packet of energy, lower than ordinarily predicted by quantum physics. The new technique theoretically could be used to cool objects to absolute zero, the temperature at which matter is devoid of nearly all energy and motion, NIST scientists said.
“The colder you can get the drum, the better it is for any application,” said NIST physicist John Teufel, who led the experiment. “Sensors would become more sensitive. You can store information longer. If you were using it in a quantum computer, then you would compute without distortion, and you would actually get the answer you want.”
“The results were a complete surprise to experts in the field,” Teufel’s group leader and co-author José Aumentado said. “It’s a very elegant experiment that will certainly have a lot of impact.”
The drum, 20 micrometers in diameter and 100 nanometers thick, is embedded in a superconducting circuit designed so that the drum motion influences the microwaves bouncing inside a hollow enclosure known as an electromagnetic cavity. Microwaves are a form of electromagnetic radiation, so they are in effect a form of invisible light, with a longer wavelength and lower frequency than visible light.
The microwave light inside the cavity changes its frequency as needed to match the frequency at which the cavity naturally resonates, or vibrates. This is the cavity’s natural “tone,” analogous to the musical pitch that a water-filled glass will sound when its rim is rubbed with a finger or its side is struck with a spoon.
NIST scientists previously cooled the quantum drum to its lowest-energy “ground state,” or one-third of one quantum. They used a technique called sideband cooling, which involves applying a microwave tone to the circuit at a frequency below the cavity’s resonance. This tone drives electrical charge in the circuit to make the drum beat. The drumbeats generate light particles, or photons, which naturally match the higher resonance frequency of the cavity. These photons leak out of the cavity as it fills up. Each departing photon takes with it one mechanical unit of energy—one phonon—from the drum’s motion. This is the same idea as laser cooling of individual atoms, first demonstrated at NIST in 1978 and now widely used in applications such atomic clocks.
The latest NIST experiment adds a novel twist—the use of “squeezed light” to drive the drum circuit. Squeezing is a quantum mechanical concept in which noise, or unwanted fluctuations, is moved from a useful property of the light to another aspect that doesn’t affect the experiment. These quantum fluctuations limit the lowest temperatures that can be reached with conventional cooling techniques. The NIST team used a special circuit to generate microwave photons that were purified or stripped of intensity fluctuations, which reduced inadvertent heating of the drum.
“Noise gives random kicks or heating to the thing you’re trying to cool,” Teufel said. “We are squeezing the light at a ‘magic’ level—in a very specific direction and amount—to make perfectly correlated photons with more stable intensity. These photons are both fragile and powerful.”
The NIST theory and experiments indicate that squeezed light removes the generally accepted cooling limit, Teufel said. This includes objects that are large or operate at low frequencies, which are the most difficult to cool.
The drum might be used in applications such as hybrid quantum computers combining both quantum and mechanical elements, Teufel said. A hot topic in physics research around the world, quantum computers could theoretically solve certain problems considered intractable today.
Suggested Items
Alternative Manufacturing Inc. (AMI) Appoints Gregory Picard New Business Development Manager
05/01/2025 | Alternative Manufacturing, Inc.Alternative Manufacturing Inc. (AMI) is pleased to announce the appointment of Mr. Gregory Picard as our new Business Development Manager. Picard brings a wealth of experience in Sales and Business Development, having worked with some of the most prominent names in the industry.
Elephantech, Logitech Together Drive Disruptive Electronics Innovation
05/01/2025 | ElephantechElephantech Inc. announced a groundbreaking collaboration with Logitech International to revolutionize peripherals manufacturing and the printed circuit board (PCB) industry.
A Visit With ‘Flexperts’ Mark Finstad and Nick Koop
05/01/2025 | Joe Fjelstad, Verdant ElectronicsAt IPC APEX EXPO 2025, I chatted with seasoned flex experts Mark Finstad and Nick Koop about "Flexperts" and their roles as leading educators and in the realm of standards development for this increasingly indispensable electronic interconnection technology. They have been teaching about lessons learned and how to successfully navigate the “seas” of flexible circuits to help their students avoid the hazards that have taken down many of their predecessors in the past.
Ensuring a Strong and Reliable Supply Chain
04/30/2025 | Marcy LaRont, PCB007 MagazineKelly Davidson, vice president of NCAB Group USA, discusses the company's stable performance in 2024 and positive outlook for 2025. She highlights NCAB's strategy of organic growth and strategic acquisitions amidst tariff concerns and global political uncertainty. Kelly emphasizes the importance of supply chain diversification, strong supplier relationships, and customer education, and notes NCAB's focus on defense production and maintaining a reliable supply chain.
Choosing the Right Strategic Path
04/29/2025 | Marcy LaRont, PCB007 MagazineTom Yang, CEO of CEE PCB, discusses the current economic challenges, noting reduced purchasing power post-pandemic. He highlights the growing demand for HDI in consumer electronics due to AI growth. Tom also expresses concerns about tariffs under the new U.S. administration, prompting CEE to diversify production locations, including new plants in Southeast Asia. He emphasizes the need for PCB manufacturers to adapt strategically amidst rising costs and fierce competition, particularly for mid-sized shops facing unique challenges in the industry.