Drone Flight Tests FAA's Technologies for Spacecraft Re-entry
January 23, 2017 | NASAEstimated reading time: 3 minutes

High-altitude drone tests new Federal Aviation Administration, FAA, surveillance technologies potential to support commercial spacecraft.
Near Space Corporation launched its balloon borne high-altitude drone from Tillamook, Oregon, carrying a special payload with FAA new technologies on board. Credits: Near Space Corporation
A drone released from a high-altitude balloon carried a payload to evaluate how the equipment could help the FAA detect and track commercial spacecraft entering the National Air Space, NAS, as it descends from space.
Near Space Corporation, NSC, in Tillamook, Oregon, conducted the flight test on Oct. 3 under the first FAA Unmanned Aircraft System (UAS) test site for UAS high-altitude Certificate of Authorization, COA. With that flight, NSC became the first commercial suborbital space company to conduct a flight test under the agency's UAS rules.
"It was great to get this first flight with the new COA under our belt," said Tim Lachenmeier, Near Space CEO. "It took a long time, and a lot of dedicated support from the FAA to get this accomplished. NSC is very excited about the opportunities this high-altitude UAS COA provides, and the unprecedented ability to support testing of technologies for the commercial space industry."
NASA's Flight Opportunities program, under the agency's Space Technology Mission Directorate, funded the balloon flight of the FAA surveillance technology system. The program uses commercial suborbital vehicles and stratospheric balloons to test flight technologies, which raises the technology readiness level of the payloads.
"Flight testing and advancing technologies needed by the FAA to allow detection and surveillance of future spacecraft while entering the national airspace is crucial for the Flight Opportunities program," said Paul De Leon, NASA'S Flight Opportunities campaign manager. "The program is continuing to grow by adding new commercial suborbital launch vehicles as they become viable, which can increase opportunities for maturing technologies much needed for future space exploration."
Oregon's Tillamook Test Range is part of the Pan Pacific UAS Test Range Complex that is one of the FAA's six designated UAS test sites in the country. The FAA's Office of Commercial Space Transportation worked with NSC to integrate the special payload into NSC's High Altitude Shuttle System, HASS, which is a lifting body-shaped drone used to carry new technologies to high altitude for testing and then released to fly back and land at the range semi-autonomously.
The stratospheric balloon system reached 70,000 feet altitude before it released the HASS to simulate a winged spacecraft's entry into FAA Class A controlled airspace. The descent back to the launch site lasted slightly over 30 minutes, and was followed by the FAA using the new surveillance technology.
The agency tracked the HASS drone from its Seattle Air Traffic Control Center and was observed by agency personnel at the FAA’s Office of Commercial Space Transportation in its Washington DC offices.
NSC's drone was used to provide a real-world test that simulated the return of a spacecraft through controlled airspace. Credits: Near Space Corporation
The flight provided a real-world simulation of a spacecraft re-entry to help evaluate the applicability of FAA's Next Generation air traffic control technologies. Due to current FAA UAS regulations, a special new high-altitude COA was required.
The agency issued the COA in August 2016 along with an agreement that specified the special Air Traffic Control provisions for high-altitude flight operations within the Tillamook UAS Test Range.
The purpose of a COA is to specifically help prescribe flight rules for UAS operations in the NAS for the purpose of research, development, test and evaluation. Results of the flight test are still being analyzed but planning for a second flight is underway.
Through the Flight Opportunities program, STMD selects promising technologies from industry, academia and government, and tests them on commercial launch vehicles. The Flight Opportunities program is funded by STMD, and managed at NASA's Armstrong Flight Research Center in Edwards, California. STMD is responsible for developing the crosscutting, pioneering new technologies and capabilities needed by the agency to achieve its current and future missions.
Suggested Items
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.
Study on Resonance Mitigation in Metallic Shielding for Integrated Circuits
07/08/2025 | Maria Cuesta-Martin, Victor Martinez, Vidal Gonzalez Aguado, Würth ElektronikInherent cavity resonant modes often lead to significant degradation of shielding effectiveness, responsible for unwanted electromagnetic coupling. Cavity resonant modes of the metal shielding enclosure can produce two adverse problems: the mutual coupling among different RF modules and shielding effectiveness reduction of the metal enclosure. The cabinets serve to shield certain components from electromagnetic interference (EMI). However, these cavities present some resonance peaks at 5 GHz, making it impossible to use them at higher frequencies.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.