The Marketing Minute: Cracking the Code of Technical Marketing
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
New Berkeley Lab Project Turns Waste Heat to Electricity
April 14, 2017 | DOE/Lawrence Berkeley National LaboratoryEstimated reading time: 3 minutes
Vast amounts of energy are wasted every year in the form of heat. A new project led by the Department of Energy’s Lawrence Berkeley National Lab seeks to efficiently capture that heat and convert it to electricity, potentially saving California up to $385 million per year.
With a $2-million grant from the California Energy Commission (CEC), Berkeley Lab is partnering with Alphabet Energy to create a cost-effective thermoelectric waste heat recovery system to reduce both energy use in the industrial sector and electricity-related carbon emissions. ICF International estimates that such a system could save California 3.2 million megawatt-hours per year in energy while also increasing electrical reliability. The funding comes from CEC’s Electric Program Investment Charge (EPIC) program, which funds clean energy innovation to reduce pollution, foster economic development, and meet the state’s climate goals.
“The potential to create electricity from waste heat in California has not been tapped significantly due to the lack of suitable waste-heat-to-electricity conversion technology,” said Ravi Prasher, director of Berkeley Lab’s Energy Storage and Distributed Resources Division. “Thermoelectrics is one of the most promising technologies for waste heat conversion out there, but the biggest challenge has been to find a reliable and cost effective material that can work at high temperatures.”
Industrial facilities, such as power plants, cement plants, mining and manufacturing facilities, and oil and gas operations have more than 763 megawatts (MW) of electricity-generating potential from waste heat in California, and national potential is approximately 15,000 MW. However, most current thermoelectric materials are limited by several factors, including high cost, low efficiency, and the inability to operate reliably at temperatures above 400 degrees Celsius.
The new Berkeley Lab project, co-led by Prasher and Vi Rapp, a mechanical research scientist in the Energy Technologies Area, is working to overcome these barriers. In collaboration with Alphabet Energy, they will develop a cost-effective process for creating an advanced thermoelectric material constructed from silicon nanowire arrays.
Thermoelectrics harvest exhaust heat from engines, furnaces, and other sources of waste heat and convert it to useful energy without generating additional greenhouse gas emissions. Commercially available thermoelectrics achieve less than 5 percent efficiency in converting heat to electricity. The technology has already seen some market traction in the oil and gas and automotive industries.
Alphabet Energy is a Hayward, California-based startup that launched in 2009 using nanotechnology licensed from Berkeley Lab. They are developing advanced thermoelectric materials based on silicon nanowires with conversion efficiencies of 10 percent or greater and the ability to operate at temperatures up to 800 degrees Celsius.
“With the increase in efficiency, other market opportunities in waste-heat-to-power could be accelerated,” Rapp said. “For example, an advanced thermoelectric system could improve remote power generation technology, bringing electricity to places without grid access or reliable solar energy.”
The higher operating temperature also opens up new possibilities, such as increasing the power produced from capturing high-temperature waste heat from gas flares.
The CEC funding will enable Berkeley Lab and Alphabet Energy to develop a prototype device and validate its performance for high temperature heat-to-electricity conversion.
“Our objective is to develop a new system that has very few parasitic losses, is more compact, is modularized for a broad scale of distributed applications, and will reliably produce additional electricity with almost no maintenance cost or operator involvement for many years,” Prasher said. “We believe it will make waste-heat-to-power viable and affordable in a wider spectrum of applications.”
About Lawrence Berkeley National Laboratory
Lawrence Berkeley National Laboratory addresses the world’s most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab’s scientific expertise has been recognized with 13 Nobel prizes. The University of California manages Berkeley Lab for the U.S. Department of Energy’s Office of Science.
About DOE’s Office of Science
DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/15/2025 | Marcy LaRont, I-Connect007In our industry, my top reads include Prashant Patel’s overview and argument for reshoring, which I found to be a great general overview and breakdown. In further support of the onshoring/reshoring message, I’m highlighting Nolan Johnson’s interview on the survey and report by the Reshoring Initiative. Check out my interview with USPAE’s Jim Will on the state of the flat panel display (FPD) industry and the risks associated with it for U.S. defense and critical infrastructure products.
Global Electronics Industry Remains Under Pressure from Rising Costs
08/04/2025 | Global Electronics AssociationThe global electronics manufacturing supply chain remains under pressure from rising costs, with 61% of firms reporting higher material costs and 54% noting increased labor expenses. according to the Global Electronics Association’s Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Statement from the Global Electronics Association on the July 2025 Tariff on Copper Foil and Electronics-Grade Copper Inputs
07/31/2025 | Global Electronics AssociationWe are disappointed by today’s decision to impose a 50% tariff on imported copper foil and other essential materials critical to electronics manufacturing in the United States.
Direct Metallization: A Sustainable Shift in PCB Fabrication
07/31/2025 | Jim Watkowski, Harry Yang, and Mark Edwards, MacDermid Alpha Electronics SolutionsThe global electronics industry is undergoing a significant transformation, driven by the need for more resilient supply chains and environmentally sustainable manufacturing practices. Printed circuit boards (PCBs), the backbone of interconnection for electronic devices, are at the center of this shift. Traditionally, PCB fabrication has relied heavily on electroless copper, a process that, while effective, is resource-intensive and environmentally hazardous. In response, many manufacturers are turning to direct metallization technologies as a cleaner, more efficient alternative.
Considering the Future of Impending Copper Tariffs
07/30/2025 | I-Connect007 Editorial TeamThe Global Electronics Association is alerting industry members that a potential 50% tariff on copper could hit U.S. electronics manufacturers where it hurts.