The Government Circuit: News on Defense Electronics, Europe, and Sustainability
American Made Advocacy: Taking the Fight to Capitol Hill
Defense Speak Interpreted: SWaPing Nanosatellites for Defense Systems
Bruce Mahler Discusses Ohmega’s Resistive Material Technology
May 7, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
Bruce Mahler, vice president of Ohmega Technologies, sat down for an interview with me at DesignCon 2017. He discussed the company’s latest embedded resistive materials, as well as some of the drivers and challenges in that segment of the materials industry.
Andy Shaughnessy: Bruce, why don't you start off by giving us a brief background on Ohmega Technologies.
Bruce Mahler: Ohmega Technologies manufactures a thin-film resistive material, which is a nickel phosphorous alloy plated onto copper foil. That resistive foil, called OhmegaPly RCM, is laminated to a dielectric like regular copper foil and is then subtractively processed using standard PCB print and etch, to create resistive elements that are used either embedded within a multilayer printed circuit board or on the surface of a printed circuit board. We've been doing this for more than 40 years now, and we’re surprised with the variety of applications that use our technology. Every year it seems that there are new applications, new ways to use the resistive film. So, it's like a constant renewal of the technology in new opportunities, of new growth of the use of embedded resistors within printed circuit boards.
Shaughnessy: What are the primary markets that these boards wind up in?
Mahler: Good question. One of the primary markets is A&D (aerospace & defense) which we have been supplying our products to for decades. It’s mostly used in radar systems, control circuits, and in critical operating systems where absolute performance and reliability are essential. The resistive material cannot be affected by temperature extremes, high G-force, vibration, magnetic or cosmic radiation and those kinds of things.
The other big market is sensor technologies. We supply our product to the MEMS microphone manufacturers. If you have a cellphone, you probably have OhmegaPly within that cell phone. We're used in the MEMS microphone of cell phones as part of an RC filter to improve the sound fidelity of the microphones; we've been doing that for many years. There’s also a growing area of applications and use in sensor technologies: not just MEMS microphones but other MEMS devices and technologies.
The third area of use where we see growing opportunities are in heater designs. Heater elements are used for things like semi-active laser activation of smart munitions or embedded resistors as heater elements in a printed circuit board to maintain surface components at optimum temperatures for optimum operation, whether that's in deep-space applications or even down to earth in medical diagnostic type applications. OhmegaPly has also been used as an internal heater in burn-in boards to allow for IC burn-in without the need of a temperature chamber.
To read this entire article, which appeared in the April 2017 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.