Graphene Flagship Steers Towards Higher Technology Readiness Level
May 5, 2017 | Graphene FlagshipEstimated reading time: 2 minutes
Six application-oriented spearhead projects and an invitation to express interest in joining the consortium. Those are examples of how the Graphene Flagship will move forward as it reaches midterm of its ten-year voyage. Representing the European Union's largest ever research initiative the Graphene Flagship's general assembly staked out the course for the next phase at its meeting in Bologna, Italy, in early April.
"We are happy to conclude that we have reached the goals we put up when the project started in 2013 and that the research we have produced so far is now ready to lay the ground for actual commercial applications within the coming years. Our mission is to take graphene and related 2D materials from the academic laboratories to the factory floor and we are now taking yet another important step towards industrialisation of the technologies that we have been creating," says Jari Kinaret, director of the Graphene Flagship, based at Chalmers University of Technology in Sweden.
The process of establishing the areas where resources should be focused has been ongoing for over one year and is based on different sources of input and evaluation, such as the Technology and Innovation Roadmap that has been completed by a working group within the Graphene Flagship. After identifying market motivated and narrowly defined areas where graphene could make a difference, six spearhead projects were selected for funding. They focus on a wide range of application areas, from solutions for 5G data transmission to solar energy and wearable electronics, but all have the common goal to develop new or improved products with integrated graphene or related materials (GRM).
"All of the spearhead projects have strong company involvement and are committed to produce industrial prototypes within two years, in order to spur interest also among companies that are currently not involved with the Graphene Flagship." says Kinaret.
The increased focus on innovation and commercialisation also means that the consortium of over 150 partners from 23 European countries will be adjusted to make sure that each partner has a well-defined role to fill and that there are no gaps in the value chain. To avoid such gaps the Graphene Flagship invites 15 individual Expressions of Interest for new partners with specific expertise, while a number of existing partners will have finished their tasks in the Graphene Flagship consortium.
The Graphene Flagship's second core project under EU's Horizon 2020 programme starts 1 April 2018 and runs for two years. Director Jari Kinaret is looking forward with confidence:
"We see that the centre of gravity of the Graphene Flagship is gradually moving from developing materials technologies to components and systems integration. We are exactly on schedule and I am very confident that we will reach the goal we have set for ourselves".
Suggested Items
Material Insight: The Dielectric Constant of PCB Materials
05/17/2024 | Dr. Preeya Kuray -- Column: Material InsightIn the world of PCB design, miniaturization can be achieved by using low dielectric constant (Dk) materials. Low Dk materials can allow for a reduction in thickness while maintaining a given trace width, leading to lower transmission loss and higher density circuitry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.