A New Spin on Electronics
May 30, 2017 | University of UtahEstimated reading time: 6 minutes
A University of Utah-led team has discovered that a class of “miracle materials” called organic-inorganic hybrid perovskites could be a game changer for future spintronic devices.
Spintronics uses the direction of the electron spin — either up or down — to carry information in ones and zeros. A spintronic device can process exponentially more data than traditional electronics that use the ebb and flow of electrical current to generate digital instructions. But physicists have struggled to make spintronic devices a reality.
The new study, published online today in Nature Physics, is the first to show that organic-inorganic hybrid perovskites are a promising material class for spintronics. The researchers discovered that the perovskites possess two contradictory properties necessary to make spintronic devices work — the electrons’ spin can be easily controlled, and can also maintain the spin direction long enough to transport information, a property known as spin lifetime.
PHOTO CREDIT: University of Utah
Sarah Li (left) and Z. Valy Vardeny (right) of the Department of Physics & Astronomy at the University of Utah discuss the ultrafast laser used to prepare and measure the direction of the electron spin of hybrid perovskite methyl-ammonium lead iodine (CH3NH3PbI3). They are the first to show that organic-inorganic hybrid perovskites are a promising material class for spintronics, an emerging field that uses the spin of the electron to carry information, rather than the electronic charge used in traditional electronics.
“It’s a device that people always wanted to make, but there are big challenges in finding a material that can be manipulated and, at the same time, have a long spin lifetime,” says Sarah Li, assistant professor in the Department of Physics & Astronomy at the U and lead author of the study. “But for this material, it’s the property of the material itself that satisfies both.”
The miracle material
Organic-inorganic hybrid perovskites is already famous in scientific circles for being amazingly efficient at converting sunlight into electricity.
“It’s unbelievable. A miracle material,” says Z. Valy Vardeny, distinguished professor in the Department of Physics & Astronomy and co-author of the study, whose lab studies perovskite solar cells. “In just a few years, solar cells based on this material are at 22 percent efficiency. And now it has this spin lifetime property. It’s fantastic.”
The material’s chemical composition is an unlikely candidate for spintronics, however. The hybrid perovskite inorganic frame is made of heavy elements. The heavier the atom, the easier it is to manipulate the electron spin. That’s good for spintronics. But other forces also influence the spin. When the atoms are heavy, you assume the spin lifetime is short, explains Li.
“Most people in the field would not think that this material has a long spin lifetime. It’s surprising to us, too,” says Li. “We haven’t found out the exact reason yet. But it’s likely some intrinsic, magical property of the material itself.”
Spintronics: That magnetic moment when…
Cellphones, computers and other electronics have silicon transistors that control the flow of electrical currents like tiny dams. As devices get more compact, transistors must handle the electrical current in smaller and smaller areas.
PHOTO CREDIT: University of Utah
The ultrafast laser shoots very short light pulses 80 million times a second at the hybrid perovskite material to determine whether its electrons could be used to carry information in future devices. They split the laser into two beams; the first one hits the film to set the electron spin in the desired direction. The second beam bends through a series of mirrors like a pin ball machine before hitting the perovskite film at increasing time intervals to measure how long the electron held the spin in the prepared direction.
“The silicon technology, based only on the electron charge, is reaching its size-limit,” says Li, “The size of the wire is already small. If gets any smaller, it’s not going to work in a classical way that you think of.”
“People were thinking, ‘How do we increase the amount of information in such a small area?’” adds Vardeny. “What do we do to overcome this limit?”
“Spintronics,” answers physics.
Spintronics uses the spin of the electron itself to carry information. Electrons are basically tiny magnets orbiting the nucleus of an element. Just like the Earth has its own orientation relative to the sun, electrons have their own spin orientation relative to the nucleus that can be aligned in two directions: “Up,” which represents a one, and “down,” which represents a zero. Physicists relate the electron’s “magnetic moment” to its spin.
By adding spin to traditional electronics, you can process exponentially more information than using them classically based on less or more charge.
“With spintronics, not only have you enormously more information, but you’re not limited by the size of the transistor. The limit in size will be the size of the magnetic moment that you can detect, which is much smaller than the size of the transistor nowadays,” says Vardeny.
Page 1 of 2
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Leveraging Chemical Data More Efficiently
07/29/2025 | Lynn L. Bergeson, Bergeson & CampbellSome truths transcend politics, one being that chemical data holds enduring value and is becoming increasingly essential. In the United States, regardless of which party federally controls the levers of power, it’s clear that chemical manufacturers and their customers must develop and curate robust data portfolios for their chemical inventories. The commercial imperatives driving this are undeniable and gaining traction.
2025 ASEAN IT Spending Growth Slows to 5.9% as AI-Powered IT Expansion Encounters Post-Boom Normalization
06/26/2025 | IDCAccording to the IDC Worldwide Black Book: Live Edition, IT spending across ASEAN is projected to grow by 5.9% in 2025 — down from a robust 15.0% in 2024.
Rethinking How Operators Interface With the Line
06/11/2025 | Nolan Johnson, SMT007 MagazineJurgen Schmerler, CEO of WaveOn, reveals how AI and large language models are revolutionizing electronics manufacturing. By integrating AI with machinery, operators can access real-time, multimodal information for troubleshooting and maintenance, significantly reducing training time and enhancing efficiency. He discusses the industry's challenges, the customizable knowledge bases, and the future of proactive maintenance and process control.
Standards: The Roadmap for Your Ideal Data Package
05/29/2025 | Andy Shaughnessy, Design007 MagazineIn this interview, IPC design instructor Kris Moyer explains how standards can help you ensure that your data package has all the information your fabricator and assembler need to build your board the way you designed it, allowing them to use their expertise. As Kris says, even with IPC standards, there’s still an art to conveying the right information in your documentation.
Future-proofing Electronics: ChemFORWARD Works Toward Collaboration for Safer Chemistry
05/19/2025 | Rachel Simon, ChemFORWARDThe electronics industry is facing a critical juncture. As consumer demand for sustainable products rises and regulatory pressures intensify, companies must prioritize the safety of their products and processes. This means not only complying with evolving chemical restrictions but also proactively seeking safer alternatives.