Biosensor Could Help Diagnose Illnesses Directly in Serum
August 31, 2017 | ACSEstimated reading time: 1 minute

In this age of fast fashion and fast food, people want things immediately. The same holds true when they get sick and want to know what’s wrong. But performing rapid, accurate diagnostics on a serum sample without complex and time-consuming manipulations is a tall order. Now, a team reports in ACS Sensorsthat they have developed a biosensor that overcomes these issues.
Researchers demonstrate how tailoring the sensing surface with short specific biological receptors and a polymer polyethylene glycol (PEG) can strongly enhance the sensor response. (© ACS)
Field-effect transistor (FET)-based biosensors are ideal for point-of-care diagnostics because they are inexpensive, portable, sensitive and selective. They also provide results quickly and can be mass produced to meet market demand. These sensors detect the change in an electric field that results from a target compound, such as a protein or DNA, binding to it. But serum has a high ionic strength, or a high concentration of charged ions, that can mask the targets. Previous research has reported use of pretreatment steps, complex devices, and receptors with different lengths and orientations on the sensor surface, but with limited success. Alexey Tarasov and colleagues wanted to develop a new approach that would make it easier for FETs to be made as point-of-care diagnostic devices for serum analyses.
The researchers developed a FET sensor that included antibody fragments and polyethylene glycol molecules on a gold surface, which they linked to a commercially available transducer. In this configuration, different sensor chips can be swapped out for use with the same transducer. As a proof-of-principle, they tested the sensor with human thyroid-stimulating hormone. The team found that they could detect the hormone at sub-picomolar concentrations, well below the detection limit previously reported with FETs, when testing it at elevated temperatures. They say that the device could be modified to diagnose many conditions and illnesses, and is inexpensive and easy to use.
The American Chemical Society is a not-for-profit organization chartered by the U.S. Congress. ACS is the world’s largest scientific society and a global leader in providing access to chemistry-related research through its multiple databases, peer-reviewed journals and scientific conferences. ACS does not conduct research, but publishes and publicizes peer-reviewed scientific studies. Its main offices are in Washington, D.C., and Columbus, Ohio.
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.
Polar Instruments Announces Additive Transmission Line Support for Si9000e
08/20/2025 | Polar InstrumentsTransmission lines embedded into the PCB surface are a feature of UHDI constructions. The 2025 fall release of Polar's Si9000e PCB impedance & insertion loss transmission line field solver incorporates eight new single ended, differential and coplanar transmission line structures.
Henniker Plasma Launches Stratus Turnkey Plasma Manufacturing Cell
08/13/2025 | Henniker PlasmaHenniker Plasma, a leading manufacturer of plasma treatment systems, proudly announces the launch of its Stratus Plasma Manufacturing Cell range — a fully integrated, turnkey solution that combines advanced atmospheric plasma surface treatment with robotic automation.
Trouble in Your Tank: Metallizing Flexible Circuit Materials—Mitigating Deposit Stress
08/04/2025 | Michael Carano -- Column: Trouble in Your TankMetallizing materials, such as polyimide used for flexible circuitry and high-reliability multilayer printed wiring boards, provide a significant challenge for process engineers. Conventional electroless copper systems often require pre-treatments with hazardous chemicals or have a small process window to achieve uniform coverage without blistering. It all boils down to enhancing the adhesion of the thin film of electroless copper to these smooth surfaces.
Designers Notebook: Basic PCB Planning Criteria—Establishing Design Constraints
07/22/2025 | Vern Solberg -- Column: Designer's NotebookPrinted circuit board development flows more smoothly when all critical issues are predefined and understood from the start. As a basic planning strategy, the designer must first consider the product performance criteria, then determine the specific industry standards or specifications that the product must meet. Planning also includes a review of all significant issues that may affect the product’s manufacture, performance, reliability, overall quality, and safety.