IPC Publishes Standard on Low-Pressure Molding for Circuitry Encapsulation
March 19, 2018 | IPCEstimated reading time: 1 minute
IPC announces a new standard, IPC-7621, Guideline for Design, Material Selection and General Application of Encapsulation of Electronic Circuit Assembly by Low Pressure Molding with Thermoplastics, a guidance document that offers instruction on using Low Pressure Molding (LPM) in place of potting for circuitry encapsulation.
Unlike potting, where the potting vessel becomes the outer “shell” of the encapsulated part, LPM utilizes mold tooling which is removable and re-useable. LPM also creates a physical layer, providing mechanical and environmental protection for handling and mounting the component device.
Typically, potting vessels are filled with potting compound which hardens in the vessel, causing the vessel to become part of the potted assembly. LPM requires no such vessel and can be molded into a desired form. LPM is commonly done with polyamide (PA) polymer, a thermoplastic, that is brought to liquid state, encapsulating electronic assemblies into a desired form or shape. After the material has cooled, a thick plastic layer remains, working as a protective, sealed barrier. This layer protects the board and components from the environment.
“LPM should be considered when you need to protect the fragile parts of the circuit assembly from shock, vibration, or corrosive or damp environments,” said Russell Steiner, chair of the 5-33g Low Pressure Molding Task Group that published the standard. “In high vibration environments, the mechanical adhesion and resonance dampening properties of LPM materials mitigate the force seen on component bodies and lead attachment. Because mold tooling is reusable, there is a significant cost savings when using LPM.”
IPC-7621 is intended to provide insight to the possible uses for LPM, covering terminology associated with the LPM process in relation to electronic board assembly.
Suggested Items
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
The Knowledge Base: A CM’s Perspective on Box Build Practices
04/30/2024 | Mike Konrad -- Column: The Knowledge BaseIn the ever-evolving landscape of electronics manufacturing, the box-build process stands out as a critical phase that bridges the gap between individual component manufacturing and the delivery of a fully functional electronic system. This intricate procedure, encompassing the assembly of everything from PCBs to wire harnesses and mechanical enclosures, demands a high level of precision, efficiency, and innovation. As the electronics assembly industry expands and diversifies, understanding the best practices within box-build assembly has become paramount for manufacturers aiming to stay ahead in a competitive market.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
Determining the Value-add of Box Build
04/24/2024 | Nolan Johnson, I-Connect007At a strategic level, adding box-building services makes sense for customer loyalty. But is it really that simple? Jon Schmitz, who manages customer engagement at RiverSide Integrated Solutions, talk about about what it really takes to be successful in offering EMS and final assembly services under the same company banner.
IMAPS & IPC to Host Onshoring Workshop
04/16/2024 | IPCThe International Microelectronics Assembly and Packaging Society (IMAPS) and IPC will host an Onshoring Workshop to discuss ongoing progress and forward-looking strategies to drive the Onshoring Advanced Packaging and Assembly, April 29 – May 1, 2024, in Arlington, Virginia.