Weird Superconductor Leads Double Life
March 21, 2018 | SLAC National Accelerator LaboratoryEstimated reading time: 4 minutes

Until about 50 years ago, all known superconductors were metals. This made sense, because metals have the largest number of loosely bound “carrier” electrons that are free to pair up and flow as electrical current with no resistance and 100 percent efficiency – the hallmark of superconductivity.
Image caption: One unusual property of superconducting materials is that they expel magnetic fields and thus cause magnets to levitate, as shown here. A study at SLAC and Stanford of a particularly odd superconductor, strontium titanate, will aid understanding and development of these materials. (ViktorCap/iStock)
Then an odd one came along – strontium titanate, the first oxide material and first semiconductor found to be superconducting. Even though it doesn’t fit the classic profile of a superconductor – it has very few free-to-roam electrons – it becomes superconducting when conditions are right, although no one could explain why.
Now scientists have probed the superconducting behavior of its electrons in detail for the first time. They discovered it’s even weirder than they thought. Yet that’s good news, they said, because it gives them a new angle for thinking about what’s known as “high temperature” superconductivity, a phenomenon that could be harnessed for a future generation of perfectly efficient power lines, levitating trains and other revolutionary technologies.
The research team, led by scientists at the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University, described their study in a paper published Jan. 30 in the Proceedings of the National Academy of Sciences.
"If conventional metal superconductors are at one end of a spectrum, strontium titanate is all the way down at the other end. It has the lowest density of available electrons of any superconductor we know about,” said Adrian Swartz, a postdoctoral researcher at the Stanford Institute for Materials and Energy Science (SIMES) who led the experimental part of the research with Hisashi Inoue, a Stanford graduate student at the time.
“It’s one of a large number of materials we call ‘unconventional’ superconductors because they can’t be explained by current theories,” Swartz said. “By studying its extreme behavior, we hope to gain insight into the ingredients that lead to superconductivity in these unconventional materials, including the ones that operate at higher temperatures.”
Dueling Theories
According to the widely accepted theory known as BCS for the initials of its inventors, conventional superconductivity is triggered by natural vibrations that ripple through a material’s atomic latticework. The vibrations cause carrier electrons to pair up and condense into a superfluid, which flows through the material with no resistance – a 100-percent-efficient electric current. In this picture, the ideal superconducting material contains a high density of fast-moving electrons, and even relatively weak lattice vibrations are enough to glue electron pairs together.
But outside the theory, in the realm of unconventional superconductors, no one knows what glues the electron pairs together, and none of the competing theories hold sway.
To find clues to what’s going on inside strontium titanate, scientists had to figure out how to apply an important tool for studying superconducting behavior, known as tunneling spectroscopy, to this material. That took several years, said Harold Hwang, a professor at SLAC and Stanford and SIMES investigator.
“The desire to do this experiment has been there for decades, but it’s been a technical challenge,” he said. “This is, as far as I know, the first complete set of data coming out of a tunneling experiment on this material.” Among other things, the team was able to observe how the material responded to doping, a commonly used process where electrons are added to a material to improve its electronic performance.
‘Everything is Upside Down’
The tunneling measurements revealed that strontium titanate is the exact opposite of what you’d expect in a superconductor: Its lattice vibrations are strong and its carrier electrons are few and slow.
“This is a system where everything is upside down,” Hwang said.
On the other hand, details like the behavior and density of its electrons and the energy required to form the superconducting state match what you would expect from conventional BCS theory almost exactly, Swartz said.
“Thus, strontium titanate seems to be an unconventional superconductor that acts like a conventional one in some respects,” he said. “This is quite a conundrum, and quite a surprise to us. We discovered something that was more confusing than we originally thought, which from a fundamental physics point of view is more profound.”
He added, “If we can improve our understanding of superconductivity in this puzzling set of circumstances, we could potentially learn how to harvest the ingredients for realizing superconductivity at higher temperatures.”
The next step, Swartz said, is to use tunneling spectroscopy to test a number of theoretical predictions about why strontium titanate acts the way it does.
SIMES is a joint SLAC/Sanford institute. Theorists from SIMES and from the University of Tennessee, Knoxville also contributed to this study, which was funded by the DOE Office of Science and the Gordon and Betty Moore Foundation’s Emergent Phenomena in Quantum Systems Initiative.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
I-Connect007 Launches Advanced Electronics Packaging Digest
09/15/2025 | I-Connect007I-Connect007 is pleased to announce the launch of Advanced Electronics Packaging Digest (AEPD), a new monthly digital newsletter dedicated to one of the most critical and rapidly evolving areas of electronics manufacturing: advanced packaging at the interconnect level.
Panasonic Industry will Double the Production Capacity of MEGTRON Multi-layer Circuit Board Materials Over the Next Five Years
09/15/2025 | Panasonic Industry Co., Ltd.Panasonic Industry Co., Ltd., a Panasonic Group company, announced plans for a major expansion of its global production capacity for MEGTRON multi-layer circuit board materials today. The company plans to double its production over the next five years to meet growing demand in the AI server and ICT infrastructure markets.
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
09/15/2025 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite are gaining popularity throughout the world. The environmental and productivity gains achievable with this process are outstanding. Direct metallization reduces the costs of compliance, waste treatment, and legal issues related to chemical exposure. A graphite-based direct plate system has been devised to address these needs.
Fresh PCB Concepts: Designing for Success at the Rigid-flex Transition Area
08/28/2025 | Team NCAB -- Column: Fresh PCB ConceptsRigid-flex PCBs come in all shapes and sizes. Manufacturers typically use fire-retardant, grade 4 (FR-4) materials in the rigid section and flexible polyimide materials in the flex region. Because of the small size, some rigid-flex PCBs, like those for hearing aid devices, are among the most challenging to manufacture. However, regardless of its size, we should not neglect the transition area between the rigid and flexible material.
Global Sourcing Spotlight: How to Evaluate Supplier Capabilities Worldwide
08/20/2025 | Bob Duke -- Column: Global Sourcing SpotlightIn global sourcing, the difference between a competitive edge and a catastrophic disruption often comes down to how well you vet your suppliers. Sourcing advanced PCBs, precision components, or materials for complex assemblies demands diligence, skepticism, and more than a little time on airplanes. Here’s how to do your due diligence when evaluating international suppliers and why cutting corners can cost you more than money.