Rogers to Showcase Advanced Circuit Materials at the Del Mar Electronic & Manufacturing Show
April 23, 2018 | Rogers CorporationEstimated reading time: 3 minutes
Rogers Corporation will be highlighting circuit materials with the characteristics needed for present and future high-frequency electronic circuit designs, including Fifth Generation (5G) wireless networks, at the upcoming Del Mar Electronic & Manufacturing Show, May 2-3 at the Del Mar Fairgrounds (San Diego, California). The Del Mar Electronic & Manufacturing Show is a premiere event for designers and manufacturers of consumer electronic products and services as well as technology-based products.
Representatives from Rogers Corp. (www.rogerscorp.com) will be at Booth #622 to offer advice and guidance on the optimum use of their circuit materials for many present and future high-frequency circuit designs, including RO4835T™ laminates, RO4450T™ Bonding Materials and CU4000™ and U4000 LoPro® copper foils for forming thin, low-loss multilayer circuits, CLTE-MW™ laminates for microwave and millimeter-wave circuits in present and future communications devices, and RO4360G2™ laminates for compact, low-cost power amplifiers in wireless base stations.
Visitors to the Rogers booth at the Del Mar conference and exhibition can learn more about low-loss materials for multilayer circuits, such as RO4835T laminates and RO4450T bonding materials. With the growing demand for complex high-frequency and high-speed circuits that must fit tight places, multilayer circuit constructions provide solutions in compact sizes. RO4835T laminates are low-loss, spread-glass-reinforced, ceramic-filled thermoset materials that serve as thin, high-performance inner circuit layers when used with Rogers Corp.’s RO4835 laminate, the RO4000® family of laminates, or with CU4000 or CU4000 LoPro foils when designers are looking for foil lamination builds.
RO4835T laminates, which are available in 2.5, 3, and 4 mil thicknesses, feature stable dielectric constant (Dk) of 3.3. When fabricating thin multilayer circuits, Rogers Corp.’s RO4450T Bonding Materials provide 3.2 to 3.3 Dk and low-loss characteristics to complement RO4835T, RO4835, and RO4000 laminates in forming reliable multilayer circuits compatible with FR-4 processing methods. Spread-glass-reinforced, ceramic-filled RO4450T bonding materials are available in 3, 4, and 5 mil thicknesses and, along with RO4835T laminates, are lead-free process compatible and feature the UL 94 V-0 flame-retardant rating.
For emerging Fifth Generation (5G) wireless networks and their use of added bandwidth at millimeter-wave frequencies of 24 GHz and higher, CLTE-MW laminates are available in seven thickness options from 3 to 10 mils for circuit designs limited in thickness due to mechanical or electrical requirements, including for PCB antenna arrays. These are ceramic-filled, woven-glass-reinforced PTFE composite materials with excellent dimensional stability and low Z-axis (thickness) coefficient of thermal expansion (CTE) of 30 ppm/ºC for reliable plated through holes.
Cost-effective CLTE-MW laminates have high filler loading to minimize glass-weave effects that can be detrimental at millimeter-wave frequencies. They feature low loss tangent of 0.0015 at 10 GHz, low moisture absorption of 0.03%, and thermal conductivity of 0.42 W/mK for effective dissipation of heat in high-power circuits. CLTE-MW laminates are available with a number of copper foil options, including rolled, reverse-treated ED, and standard ED copper. Resistive foil and metal plate options are also available upon request. These thin, high-frequency laminates also feature the UL 94 V-0 flame-retardant rating.
Rogers will have other materials on display at Del Mar Booth #622, including RO4360G2 laminates, formulated for power amplifier designers seeking enhanced thermal reliability in smaller circuit sizes. These low-loss glass-reinforced, ceramic-filled thermoset circuit materials process similar to FR-4 with low dissipation factor of 0.0038 and thermal conductivity of 0.75 W/mK well suited for power amplifier designs. RO4360G2 laminates exhibit a dielectric constant of 6.15 at 10 GHz in the z direction, tightly controlled within +/-0.15. These are just a sampling of the materials that will be on display at the Rogers booth at the upcoming Del Mar Electronic & Manufacturing Show.
About Rogers Corporation
Rogers Corporation is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and performance apparel; and Advanced Connectivity Solutions materials for wireless infrastructure, automotive safety and radar systems. Headquartered in Arizona (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.